Supplementary Provisions, Article 2Transitional Measures
第二条(経過措置)
With regard to holders that conform to the standard for holders prescribed in Japanese Industrial Standard C 9302 (Welding Rod Holders), which was abolished upon the establishment of Japanese Industrial Standard C 9300-11 (Welding Rod Holders) (hereinafter in this Article referred to as the "new standard"), and holders that have an insulating effect and heat resistance equal or superior thereto, which do not conform to the standard for holders prescribed in the new standard, the provisions of Article 331 of the Ordinance on Industrial Safety and Health after the amendment by this Ministerial Order do not apply for the time being, and the provisions of Article 331 of the Ordinance on Industrial Safety and Health prior to the amendment by this Ministerial Order remain in force.
日本工業規格C九三〇〇―一一(溶接棒ホルダ)(以下この条において「新規格」という。)の制定に伴い廃止された日本工業規格C九三〇二(溶接棒ホルダ)に定めるホルダーの規格に適合するもの並びにこれと同等以上の絶縁効力及び耐熱性を有するものであって、新規格に定めるホルダーの規格に適合しないものについては、当分の間、この省令による改正後の労働安全衛生規則第三百三十一条の規定は適用せず、この省令による改正前の労働安全衛生規則第三百三十一条の規定は、なおその効力を有する。
new standardmachine translation
「新規格」
Japanese Industrial Standard C 9300-11 (welding electrode holders), which replaced the abolished Japanese Industrial Standard C 9302 (in Article 2 of the supplementary provisions (附則) of Ministry of Health, Labour and Welfare Order No. 146 of 2008).
Short name set inSupplementary Provisions, Article 2, paragraph (1)· applies only in this article