Search

Search provisions, jump to a law or an article

2 articles

Supplementary Provisions

附 則

Supplementary Provisions, Article 1Effective Date

第一条(施行期日)

This Ministerial Order comes into effect as of October 25, 2008.

この省令は、平成二十年十月二十五日から施行する。

Supplementary Provisions, Article 2Transitional Measures

第二条(経過措置)

With regard to holders that conform to the standard for holders prescribed in Japanese Industrial Standard C 9302 (Welding Rod Holders), which was abolished upon the establishment of Japanese Industrial Standard C 9300-11 (Welding Rod Holders) (hereinafter in this Article referred to as the "new standard"), and holders that have an insulating effect and heat resistance equal or superior thereto, which do not conform to the standard for holders prescribed in the new standard, the provisions of Article 331 of the Ordinance on Industrial Safety and Health after the amendment by this Ministerial Order do not apply for the time being, and the provisions of prior to the amendment by this Ministerial Order remain in force.

日本工業規格C九三〇〇―一一(溶接棒ホルダ)(以下この条において「新規格」という。)の制定に伴い廃止された日本工業規格C九三〇二(溶接棒ホルダ)に定めるホルダーの規格に適合するもの並びにこれと同等以上の絶縁効力及び耐熱性を有するものであって、新規格に定めるホルダーの規格に適合しないものについては、当分の間、この省令による改正後の労働安全衛生規則第三百三十一条の規定は適用せず、この省令による改正前のの規定は、なおその効力を有する。

© 2026 japanlaw.orgA copy for reading and reference — not an official source, and not legal advice. Only the Japanese text published by the government has legal effect.Run by Genjido LLC (源氏道合同会社) · contact@genjido.comContactSourcesTermsPrivacy