Search

Search provisions, jump to a law or an article

Supplementary Provisions

附 則

This Ministerial Order comes into effect as of December 1, 1991.

この省令は、平成三年十二月一日から施行する。

With regard to an alternating current arc welding machine whose no-load output voltage (meaning the voltage between the welding rod and the workpiece when the generation of the arc of the alternating current arc welding machine is stopped; the same applies hereinafter) becomes 30 volts or less within 1.5 seconds (limited to one with a nameplate indicating the no-load output voltage attached to its outer case) that is being manufactured or exists at the time of the enforcement of this Ministerial Order, the provisions then in force continue to govern, notwithstanding Articles 332 and 648 of the Ordinance on Industrial Safety and Health after the amendment.

その出力側無負荷電圧(交流アーク溶接機のアークの発生を停止させた場合における溶接棒と被溶接物との間の電圧をいう。以下同じ。)が一・五秒以内に三十ボルト以下となる交流アーク溶接機(その外箱に出力側無負荷電圧を表示した銘板を取り付けたものに限る。)で、この省令の施行の際現に製造しており、又は存するものについては、改正後の労働安全衛生規則第三百三十二条及び第六百四十八条の規定にかかわらず、なお従前の例による。

© 2026 japanlaw.orgA copy for reading and reference — not an official source, and not legal advice. Only the Japanese text published by the government has legal effect.Run by Genjido LLC (源氏道合同会社) · contact@genjido.comContactSourcesTermsPrivacy