As regards the distance between the shaft of a drum barrel of a pile driver, pile drawer or boring machine and the shaft of the first sheave from the hoisting equipment, the employer must set the distance to a value equivalent to 15 times or more of the width of the drum of the hoisting equipment.
The sheave referred to in the preceding paragraph must go through the center of the drum of the hoisting equipment and be placed on a plane perpendicular to the shaft.
前項のみぞ車は、巻上げ装置の巻胴の中心を通り、かつ、軸に垂直な面上になければならない。
The provisions of the preceding two paragraphs do not apply to the cases falling under any of the following items:
前二項の規定は、次の各号のいずれかに該当するときは、適用しない。
when there is no risk of irregular winding of the hoisting wire rope due to the structure of the pile driver, a pile drawer or a boring machine; or
when a boring machine is used for work in a very confined space such as a tunnel, etc., and the employer has prohibited a person engaged in work at the workshop from entering an area where there is a risk of danger due to the hoisting wire rope being cut, by indicating the prohibition in a conspicuous place or by other methods.
定義第二十四条の六第一項
ずい道及びたて坑以外の坑(採石法(昭和二十五年法律第二百九十一号)第二条に規定する岩石の採取のためのものを除く。)
わかりやすく言うと
ずい道と、たて坑以外の坑をまとめた呼び名です。ただし、採石法で定める花こう岩などの岩石を採取するための坑は含みません。
略称規定第百七十三条第一項
事業者は、動力を用いるくい打機(以下「くい打機」という。)、動力を用いるくい抜機(以下「くい抜機」という。)又はボーリングマシンについては、倒壊を防止するため、次の措置を講じなければならない。
略称規定第百七十三条第一項
事業者は、動力を用いるくい打機(以下「くい打機」という。)、動力を用いるくい抜機(以下「くい抜機」という。)又はボーリングマシンについては、倒壊を防止するため、次の措置を講じなければならない。