Search

Search provisions, jump to a law or an article

1 article

Article 180Position of Sheaves

第百八十条(みぞ車の位置)

As regards the distance between the shaft of a drum barrel of a pile driver, pile drawer or boring machine and the shaft of the first sheave from the hoisting equipment, the employer must set the distance to a value equivalent to 15 times or more of the width of the drum of the hoisting equipment.

事業者は、くい打機、くい抜機又はボーリングマシンの巻上げ装置の巻胴の軸と巻上げ装置から第一番目のみぞ車の軸との間の距離については、巻上げ装置の巻胴の幅の十五倍以上としなければならない。

The sheave referred to in the preceding paragraph must go through the center of the drum of the hoisting equipment and be placed on a plane perpendicular to the shaft.

前項のみぞ車は、巻上げ装置の巻胴の中心を通り、かつ、軸に垂直な面上になければならない。

The provisions of the preceding two paragraphs do not apply to the cases falling under any of the following items:

前二項の規定は、次の各号のいずれかに該当するときは、適用しない。

when there is no risk of irregular winding of the hoisting wire rope due to the structure of the pile driver, a pile drawer or a boring machine; or

くい打機、くい抜機又はボーリングマシンの構造上、巻上げ用ワイヤロープが乱巻となるおそれのないとき。

when a boring machine is used for work in a very confined space such as a tunnel, etc., and the employer has prohibited a person engaged in work at the workshop from entering an area where there is a risk of danger due to the hoisting wire rope being cut, by indicating the prohibition in a conspicuous place or by other methods.

ずい道等の著しく狭あいな場所でボーリングマシンを使用して作業を行う場合で、当該作業場において作業に従事する作業従事者が巻上げ用ワイヤロープの切断による危険が生ずるおそれのある区域に立ち入ることについて、禁止する旨を見やすい箇所に表示することその他の方法により禁止したとき。

Read this with the articles around it

© 2026 japanlaw.orgA copy for reading and reference — not an official source, and not legal advice. Only the Japanese text published by the government has legal effect.Run by Genjido LLC (源氏道合同会社) · contact@genjido.comContactSourcesTermsPrivacy