別表第四の二(第四十六条関係)
Appended Table 4-2
| Machinery or other such equipment for which a design review is to be conducted | Machinery or other such equipment for which training is conducted | Requirements |
| Machinery or other such equipment set forth in Appended Table 1, item (i) or (ii) | Machinery or other such equipment set forth in Appended Table 1, items (i) and (ii) | (1) Theoretical training shall cover the following subjects. (a) Structure of specified machinery or other such equipment (b) Materials and testing methods (c) Construction and testing methods (d) Auxiliary equipment and accessories (e) Applicable laws and regulations, strength calculation methods and inspection standards (2) Training shall be provided by a registered agency for design reviews and post-manufacturing inspections. |
| Machinery or other such equipment set forth in Appended Table 1, item (iii) or (v) | Machinery or other such equipment set forth in Appended Table 1, items (iii) and (v) | |
| Machinery or other such equipment set forth in Appended Table 1, item (iv) | Machinery or other such equipment set forth in Appended Table 1, item (iv) | |
| Machinery or other such equipment set forth in Appended Table 1, item (vi) or (vii) | Machinery or other such equipment set forth in Appended Table 1, items (vi) and (vii) | |
| Machinery or other such equipment set forth in Appended Table 1, item (viii) | Machinery or other such equipment set forth in Appended Table 1, item (viii) |
| 設計審査を行おうとする機械等 | 研修を行う機械等 | 要件 |
| 別表第一第一号又は第二号に掲げる機械等 | 別表第一第一号及び第二号に掲げる機械等 | (1) 学科研修が、次に掲げる科目について行われるものであること。 イ 特定機械等の構造 ロ 材料及び試験方法 ハ 工作及び試験方法 ニ 附属装置及び附属品 ホ 関係法令、強度計算方法及び検査基準 (2) 登録設計審査等機関が行うものであること。 |
| 別表第一第三号又は第五号に掲げる機械等 | 別表第一第三号及び第五号に掲げる機械等 | |
| 別表第一第四号に掲げる機械等 | 別表第一第四号に掲げる機械等 | |
| 別表第一第六号又は第七号に掲げる機械等 | 別表第一第六号及び第七号に掲げる機械等 | |
| 別表第一第八号に掲げる機械等 | 別表第一第八号に掲げる機械等 |
Requirements
条件
A graduate of a university or technical college under the School Education Act who completed an engineering course (including a person who has completed the course in the first half of a program at a professional university; hereinafter referred to as a "university or college of technology graduate with a specialization related to engineering") and who has completed training which meets all of the requirements set forth in the lower column of the following table pertaining to the machinery or other such equipment for which training is conducted set forth in the middle column of that table, corresponding to the category of machinery or other such equipment for which a design review is to be conducted set forth in the upper column of that table, and which includes 160 hours or more of theoretical training and one or more practice design reviews
A graduate of a high school or secondary school under the School Education Act who completed an engineering course (hereinafter referred to as a "high school or secondary school graduate with a specialization related to engineering") and who has completed training which meets all of the requirements set forth in the lower column of the table in (a) pertaining to the machinery or other such equipment for which training is conducted set forth in the middle column of that table, corresponding to the category of machinery or other such equipment for which a design review is to be conducted set forth in the upper column of that table, and which includes 210 hours or more of theoretical training and three or more practice design reviews
A person with knowledge and experience of at least the same level as a person as set forth in (a) or (b).
イ又はロに掲げる者と同等以上の知識経験を有する者であること。
Required number: The number shall be calculated by dividing the annual number of design reviews by 50 (any fraction shall be rounded up)
数 年間の設計審査の件数を五十で除して得た数(端数があるときは、これを切り上げる。)
略称規定第三十七条第一項
特に危険な作業を必要とする機械等として別表第一に掲げるもので、政令で定めるもの(以下「特定機械等」という。)を製造しようとする者は、厚生労働省令で定めるところにより、あらかじめ、都道府県労働局長の許可を受けなければならない。
わかりやすく言うと
特に危険な作業を必要とする機械等として別表第一に掲げるもの(ボイラー、第一種圧力容器、クレーン、移動式クレーン、デリック、エレベーター、建設用リフト、ゴンドラ)のうち、政令で定めるもののことです。
略称規定第三十七条第三項
第一項の許可の申請は、厚生労働省令で定めるところにより、別表第一に掲げる機械等に係る特定機械等ごとに厚生労働大臣の登録を受けた者(以下「登録設計審査等機関」という。)が行つた当該申請に係る特定機械等の設計が前項の基準のうち特定機械等の構造…
わかりやすく言うと
ボイラーやクレーンなど特に危険な作業を必要とする特定機械等について、その設計が構造の基準に合っているかどうかの審査(設計審査)などを行う、厚生労働大臣の登録を受けた機関のことです。製造許可の申請には、原則としてこの審査の結果を記した書類を添えます。
略称規定第三十七条第三項
…別表第一に掲げる機械等に係る特定機械等ごとに厚生労働大臣の登録を受けた者(以下「登録設計審査等機関」という。)が行つた当該申請に係る特定機械等の設計が前項の基準のうち特定機械等の構造に係る部分に適合しているかどうかの審査(以下「設計審査…
わかりやすく言うと
ボイラーやクレーンなどの特定機械等の設計が、厚生労働大臣の定める基準のうち構造に関する部分に合っているかどうかについて、登録設計審査等機関が行う審査のことです。製造許可の申請には、原則としてその結果を記した書類を添えます。
略称規定第八十二条第三項第二号
学校教育法による短期大学(同法による専門職大学の前期課程(以下「専門職大学前期課程」という。)を含む。)又は高等専門学校において理科系統の正規の課程を修めて卒業した者(専門職大学前期課程にあつては、修了した者)で…
わかりやすく言うと
学校教育法による専門職大学の前期課程のことです。この号では短期大学に含めて扱い、その課程を修了した人を、短期大学を卒業した人と同じように扱います。
略称規定別表第四の二第一号イ
学校教育法による大学又は高等専門学校において工学に関する学科を修めて卒業した者(当該学科を修めて専門職大学前期課程を修了した者を含む。以下「工学関係大学等卒業者」という。)で、次の表の上欄に掲げる設計審査を行おうとする機械等の区分に応じ…
わかりやすく言うと
学校教育法による大学又は高等専門学校で、工学に関する学科を修めて卒業した人のことです。その学科を修めて専門職大学の前期課程を修了した人も含みます。
略称規定別表第四の二第一号ロ
学校教育法による高等学校又は中等教育学校において工学に関する学科を修めて卒業した者(以下「工学関係高等学校等卒業者」という。)で、イの表の上欄に掲げる設計審査を行おうとする機械等の区分に応じ…
わかりやすく言うと
学校教育法による高等学校または中等教育学校で、工学に関する学科を修めて卒業した人のことです。