Article 36Work Necessitating Special Education
Dangerous or harmful work prescribed by the Order of the Ministry of Health, Labour and Welfare set forth in Article 59, paragraph (3) of the Act is as follows:
法第五十九条第三項の厚生労働省令で定める危険又は有害な業務は、次のとおりとする。
work involving replacement of grinding wheels or their test runs at the time of replacement;
研削といしの取替え又は取替え時の試運転の業務
work involving fitting, removal, or adjustment of metal dies of a power-driven press machine (hereinafter referred to as "power press"), or of blades of shearing machines, or of safety devices or safety enclosures of power press or shearing machines;
動力により駆動されるプレス機械(以下「動力プレス」という。)の金型、シヤーの刃部又はプレス機械若しくはシヤーの安全装置若しくは安全囲いの取付け、取外し又は調整の業務
work involving welding or cutting of metals by arc welding equipment (hereinafter referred to as "arc welding, etc.");
アーク溶接機を用いて行う金属の溶接、溶断等(以下「アーク溶接等」という。)の業務
work involving installation, inspection, repair or operation of charged circuits with high voltage (meaning a voltage exceeding 750 V and 7,000 V or less for direct current, or exceeding 600 V and 7,000 V or less for alternating current; the same applies hereinafter) or extra-high voltage (meaning a voltage exceeding 7,000 V; the same applies hereinafter) or of the anchorages of such charged circuits, work involving installation or repair of charged circuits with low voltage (meaning a voltage of 750 V or less for direct current, or 600 V or less for alternating current; the same applies hereinafter) (excluding those with a voltage to ground of 50 V or less and those for telegraph or telephone use, etc. that are not liable to cause danger by electric shock) (excluding the work set forth in the following item), or work involving operation of switches with exposed live parts among low-voltage electric circuits installed in sectioned spaces such as switchboard rooms and substations (excluding those with a voltage to ground of 50 V or less and those for telegraph or telephone use, etc. that are not liable to cause danger by electric shock);
高圧(直流にあつては七百五十ボルトを、交流にあつては六百ボルトを超え、七千ボルト以下である電圧をいう。以下同じ。)若しくは特別高圧(七千ボルトを超える電圧をいう。以下同じ。)の充電電路若しくは当該充電電路の支持物の敷設、点検、修理若しくは操作の業務、低圧(直流にあつては七百五十ボルト以下、交流にあつては六百ボルト以下である電圧をいう。以下同じ。)の充電電路(対地電圧が五十ボルト以下であるもの及び電信用のもの、電話用のもの等で感電による危害を生ずるおそれのないものを除く。)の敷設若しくは修理の業務(次号に掲げる業務を除く。)又は配電盤室、変電室等区画された場所に設置する低圧の電路(対地電圧が五十ボルト以下であるもの及び電信用のもの、電話用のもの等で感電による危害の生ずるおそれのないものを除く。)のうち充電部分が露出している開閉器の操作の業務
work involving maintenance of an automobile with a built-in battery whose voltage to ground exceeds 50 V;
対地電圧が五十ボルトを超える蓄電池を内蔵する自動車の整備の業務
work operating a forklift with a maximum load of less than 1 ton (excluding the case of traveling on the road under Article 2, paragraph (1), item (i) of the Road Traffic Act (Act No. 105 of 1960) (hereinafter referred to as "road"));
最大荷重一トン未満のフオークリフトの運転(道路交通法(昭和三十五年法律第百五号)第二条第一項第一号の道路(以下「道路」という。)上を走行させる運転を除く。)の業務
work operating a shovel loader or a fork loader with a maximum load of less than 1 ton (excluding the case of traveling on the road);
最大荷重一トン未満のシヨベルローダー又はフオークローダーの運転(道路上を走行させる運転を除く。)の業務
work operating a transporting vehicle on rough terrain with a maximum loading capacity of less than 1 ton (excluding the case of traveling on the road);
最大積載量が一トン未満の不整地運搬車の運転(道路上を走行させる運転を除く。)の業務
work operating a tailgate lifter (meaning a lift installed at the rear of the loading platform of a truck set forth in Article 151-2, item (vii) and driven by power; the same applies hereinafter) (limited to that involving work of loading cargo onto the truck or unloading cargo from the truck);
テールゲートリフター(第百五十一条の二第七号の貨物自動車の荷台の後部に設置された動力により駆動されるリフトをいう。以下同じ。)の操作の業務(当該貨物自動車に荷を積む作業又は当該貨物自動車から荷を卸す作業を伴うものに限る。)
work operating a cargo lifting appliance with a limited capacity of less than 5 tons;
制限荷重五トン未満の揚貨装置の運転の業務
work operating a machine for felling, etc. (meaning a machine, power-driven and capable of self-propelling to unspecified places, used to fell trees, to buck them, or to pile logs or firewood; the same applies hereinafter) (excluding the case of traveling on the road);
伐木等機械(伐木、造材又は原木若しくは薪炭材の集積を行うための機械であつて、動力を用い、かつ、不特定の場所に自走できるものをいう。以下同じ。)の運転(道路上を走行させる運転を除く。)の業務
work operating a traveling yarding machine (meaning a machine for yarding by traveling of a vehicle, that is power-driven and capable of self-propelling to unspecified places; the same applies hereinafter) (excluding the case of traveling on the road);
走行集材機械(車両の走行により集材を行うための機械であつて、動力を用い、かつ、不特定の場所に自走できるものをいう。以下同じ。)の運転(道路上を走行させる運転を除く。)の業務
work operating a skyline logging cable crane (meaning a facility composed of a yarder, cables, carriers, supports, and fittings thereof, that lifts logs or firewood (hereinafter referred to as "logs, etc.") using power and carries them in the air; the same applies hereinafter);
機械集材装置(集材機、架線、搬器、支柱及びこれらに附属する物により構成され、動力を用いて、原木又は薪炭材(以下「原木等」という。)を巻き上げ、かつ、空中において運搬する設備をいう。以下同じ。)の運転の業務
work operating a simplified skyline logging cable crane (meaning a facility composed of a yarder, cables, carriers, supports, and fittings thereof, that lifts logs, etc. using power and carries them with a part of the logs, etc. in contact with the ground; the same applies hereinafter) or a cable yarding machine (meaning a machine for carrying logs, etc. by lifting them using power, that is power-driven and capable of self-propelling to unspecified places; the same applies hereinafter) (excluding the case of traveling on the road);
work using a chain saw for the felling of a standing tree, disposing of a hanging tree, or logging;
チェーンソーを用いて行う立木の伐木、かかり木の処理又は造材の業務
work operating a machine listed in the Appended Table 7, item (1), (2), (3) or (6) of the Order with the base machine weight of less than 3 tons, equipped with power-driven system and capable of self-propelling to unspecified places (excluding the case of traveling on the road);
work operating a machine listed in the Appended Table 7, item (3) of the Order, equipped with power-driven system and other than that capable of self-propelling to unspecified places;
work operating the working attachment of a machine listed in the Appended Table 7, item (3) of the Order, equipped with power-driven system and capable of self-propelling to unspecified places (excluding operation in the operator's seat on the body);
work operating a machine listed in the Appended Table 7, item (4) of the Order, those equipped with power-driven system and capable of self-propelling to unspecified places (excluding the case of traveling on the road);
work operating the working attachment of a machine listed in the Appended Table 7, item (5) of the Order;
work operating boring machines;
ボーリングマシンの運転の業務
work involving adjustment or operation of jack-type lifting machines (meaning machines equipped with multiple holding mechanisms (meaning mechanisms which hold a load by tightening a wire rope, etc.; the same applies hereinafter) that lift a load up and down with wire rope, etc., by opening and closing the holding mechanisms alternately to expand and contract the distance between the holding mechanisms using power; the same applies hereinafter), in the case of carrying out construction work;
建設工事の作業を行う場合における、ジャッキ式つり上げ機械(複数の保持機構(ワイヤロープ等を締め付けること等によつて保持する機構をいう。以下同じ。)を有し、当該保持機構を交互に開閉し、保持機構間を動力を用いて伸縮させることにより荷のつり上げ、つり下げ等の作業をワイヤロープ等を介して行う機械をいう。以下同じ。)の調整又は運転の業務
work operating (excluding the case of traveling on the road) a vehicle for work at height (meaning the vehicle set forth in Article 10, item (vii) of the Order; the same applies hereinafter) with the working floor of less than 10 m in height (meaning the height set forth in Article 10, item (vii) of the Order);
work operating a hoist with power-driven system (excluding electric hoists, air hoists and other hoists pertaining to gondolas);
動力により駆動される巻上げ機(電気ホイスト、エヤーホイスト及びこれら以外の巻上げ機でゴンドラに係るものを除く。)の運転の業務
Deleted;
削除
work involving operation of the machinery or other such equipment (excluding a winching system) listed in Article 15, paragraph (1), item (viii) of the Order;
令第十五条第一項第八号に掲げる機械等(巻上げ装置を除く。)の運転の業務
work handling a small-sized boiler (meaning a small-sized boiler set forth in Article 1, item (iv) of the Order, the same applies hereinafter);
小型ボイラー(令第一条第四号の小型ボイラーをいう。以下同じ。)の取扱いの業務
work operating cranes listed as follows (excluding a mobile crane (meaning a mobile crane set forth in Article 1, item (viii) of the Order, the same applies hereinafter)):
次に掲げるクレーン(移動式クレーン(令第一条第八号の移動式クレーンをいう。以下同じ。)を除く。以下同じ。)の運転の業務
a crane having a lifting capacity of less than 5 tons;
つり上げ荷重が五トン未満のクレーン
a telpher having a lifting capacity of 5 tons or more;
つり上げ荷重が五トン以上の跨線テルハ
work operating a mobile crane with a lifting capacity of less than 1 ton (excluding the case of traveling on the road);
つり上げ荷重が一トン未満の移動式クレーンの運転(道路上を走行させる運転を除く。)の業務
work operating a derrick with a lifting capacity of less than 5 tons;
つり上げ荷重が五トン未満のデリツクの運転の業務
work operating a lift for construction work;
建設用リフトの運転の業務
work involving the sling work for a crane, mobile crane or derrick with a lifting capacity of less than 1 ton;
つり上げ荷重が一トン未満のクレーン、移動式クレーン又はデリツクの玉掛けの業務
work operating a gondola;
ゴンドラの操作の業務
work operating an air compressor for sending air to a working chamber or man-lock chamber;
作業室及び気こう室へ送気するための空気圧縮機を運転する業務
work operating valves or cocks for adjusting the amount of air to be delivered to working chambers pertaining to work in compressed air;
高圧室内作業に係る作業室への送気の調節を行うためのバルブ又はコツクを操作する業務
work operating valves or cocks for adjusting the amount of fresh air to be delivered to or air to be let out of a man-lock chamber;
気こう室への送気又は気こう室からの排気の調整を行うためのバルブ又はコツクを操作する業務
work operating valves or cocks for adjusting ventilation to diving workers;
潜水作業者への送気の調節を行うためのバルブ又はコツクを操作する業務
work operating a recompression chamber;
再圧室を操作する業務
work pertaining to work in hyperbaric chamber;
高圧室内作業に係る業務
work handling tetraalkyl lead, etc., listed in the Appended Table 5 of the Order;
令別表第五に掲げる四アルキル鉛等業務
work pertaining to the work at the place of an oxygen-deficient danger listed in the Appended Table 6 of the Order;
令別表第六に掲げる酸素欠乏危険場所における作業に係る業務
work involving handling, maintenance and repair of special chemical facilities (excluding maintenance work of the class-1 pressure vessels prescribed in Article 20, item (v) of the Order);
work handling an X-ray device or gamma ray irradiation device (excluding work using a device which has a controlled area (meaning the controlled area prescribed in Article 3, paragraph (1) of the Regulation on Prevention of Ionizing Radiation Hazards (Order of the Ministry of Labour No. 41 of 1972; hereinafter referred to as the "Ionizing Radiation Ordinance"); the same applies in the following item and item (xxviii)-3) only inside the device and which is structured with shielding so that no whole or part of the body of a worker enters the inside of the device during irradiation with X-rays or gamma rays);
work handling nuclear fuel material (meaning nuclear fuel material prescribed in Article 3, item (ii) of the Atomic Energy Basic Act (Act No. 186 of 1955); the same applies in the following item), spent fuel (meaning spent fuel prescribed in Article 2, paragraph (10) of the Act on the Regulation of Nuclear Source Material, Nuclear Fuel Material and Reactors (Act No. 166 of 1957); the same applies in the following item) or materials contaminated by them (including nuclear fission products; the same applies in the following item) within the controlled area of processing facilities (meaning the processing facilities prescribed in Article 13, paragraph (2), item (ii) of the Act on the Regulation of Nuclear Source Material, Nuclear Fuel Material and Reactors (Act No. 166 of 1957)), reprocessing facilities (meaning the reprocessing facilities prescribed in Article 44, paragraph (2), item (ii) of the same Act) or facilities for use, etc. (meaning the facilities for use, etc. prescribed in Article 52, paragraph (2), item (x) of the same Act (limited to the facilities for use, etc. of nuclear fuel material prescribed in Article 41 of the Enforcement Order of the Act on the Regulation of Nuclear Source Material, Nuclear Fuel Material and Reactors (Cabinet Order No. 324 of 1957)));
加工施設(核原料物質、核燃料物質及び原子炉の規制に関する法律(昭和三十二年法律第百六十六号)第十三条第二項第二号に規定する加工施設をいう。)、再処理施設(同法第四十四条第二項第二号に規定する再処理施設をいう。)又は使用施設等(同法第五十二条第二項第十号に規定する使用施設等(核原料物質、核燃料物質及び原子炉の規制に関する法律施行令(昭和三十二年政令第三百二十四号)第四十一条に規定する核燃料物質の使用施設等に限る。)をいう。)の管理区域内において核燃料物質(原子力基本法(昭和三十年法律第百八十六号)第三条第二号に規定する核燃料物質をいう。次号において同じ。)若しくは使用済燃料(核原料物質、核燃料物質及び原子炉の規制に関する法律第二条第十項に規定する使用済燃料をいう。次号において同じ。)又はこれらによつて汚染された物(原子核分裂生成物を含む。次号において同じ。)を取り扱う業務
work handling nuclear fuel material, spent fuel or materials contaminated by them within the controlled area of nuclear reactor facilities (meaning the reactor facilities for testing and research, etc. prescribed in Article 23, paragraph (2), item (v) of the Act on the Regulation of Nuclear Source Material, Nuclear Fuel Material and Reactors and the reactor facilities for power generation prescribed in Article 43-3-5, paragraph (2), item (v) of the same Act);
work of disposing of the objects set forth in Article 2, paragraph (7), item (ii), (a) or (b) of the Ordinance on Prevention of Ionizing Radiation Hazards at Works to Decontaminate Soil and Waste Contaminated by Radioactive Materials Resulting from the Great East Japan Earthquake and Related Works (Order of the Ministry of Health, Labour and Welfare No. 152 of 2011; hereinafter referred to as the "Decontamination Ordinance") and other objects contaminated by radioactive substances derived from the accident (meaning radioactive substances released from the nuclear power plant by the accident at that plant accompanying the Tohoku District - off the Pacific Ocean Earthquake that occurred on March 11, 2011), being those prescribed in Article 2, paragraph (2) of the Ionizing Radiation Ordinance;
東日本大震災により生じた放射性物質により汚染された土壌等を除染するための業務等に係る電離放射線障害防止規則(平成二十三年厚生労働省令第百五十二号。以下「除染則」という。)第二条第七項第二号イ又はロに掲げる物その他の事故由来放射性物質(平成二十三年三月十一日に発生した東北地方太平洋沖地震に伴う原子力発電所の事故により当該原子力発電所から放出された放射性物質をいう。)により汚染された物であつて、電離則第二条第二項に規定するものの処分の業務
work pertaining to the special emergency work under Article 7-2, paragraph (3) of the Ionizing Radiation Ordinance;
電離則第七条の二第三項の特例緊急作業に係る業務
work pertaining to the specified dust operation set forth in Article 2, paragraph (1), item (iii) of the Ordinance on Prevention of Hazards Due to Dust (Order of the Ministry of Labour No. 18 of 1979, hereinafter referred to as the "Dust Ordinance") (excluding the work that fall under work listed in each item of Article 3 of the Dust Ordinance carried out by controlling oil or water poured by the equipment);
粉じん障害防止規則(昭和五十四年労働省令第十八号。以下「粉じん則」という。)第二条第一項第三号の特定粉じん作業(設備による注水又は注油をしながら行う粉じん則第三条各号に掲げる作業に該当するものを除く。)に係る業務
work pertaining to excavation of tunnel, etc. and its associated work such as muck-carrying work, material-carrying work and concrete placing work of tunnel lining (limited to work performed inside the tunnel concerned);
ずい道等の掘削の作業又はこれに伴うずり、資材等の運搬、覆工のコンクリートの打設等の作業(当該ずい道等の内部において行われるものに限る。)に係る業務
work pertaining to instruction, etc. (meaning setting, altering or confirming the motion sequence, position or velocity of a manipulator for an industrial robot (a machine which is composed of manipulators and memory devices (including variable sequence control units and fixed sequence control units; hereinafter the same applies in this item) and capable of automatically performing the motions of manipulators such as telescopic, bending or stretching, raising or lowering, moving to the right or left, revolving motions, and their combined motions based on the information in the memory device, excluding those under research and development or others specified by the Minister of Health, Labour and Welfare), excluding those carried out while the power source of the industrial robot is cut off; hereinafter the same applies in this item) for the industrial robot within its movable range (meaning the maximum movable range in which manipulators and other moving parts of the industrial robot are capable of moving based on the information in the memory device; the same applies hereinafter) and pertaining to the operation of the apparatus for the instruction, etc. carried out outside of the movable range in cooperation with the worker who carries out the instruction, etc., within the movable range;
マニプレータ及び記憶装置(可変シーケンス制御装置及び固定シーケンス制御装置を含む。以下この号において同じ。)を有し、記憶装置の情報に基づきマニプレータの伸縮、屈伸、上下移動、左右移動若しくは旋回の動作又はこれらの複合動作を自動的に行うことができる機械(研究開発中のものその他厚生労働大臣が定めるものを除く。以下「産業用ロボツト」という。)の可動範囲(記憶装置の情報に基づきマニプレータその他の産業用ロボツトの各部の動くことができる最大の範囲をいう。以下同じ。)内において当該産業用ロボツトについて行うマニプレータの動作の順序、位置若しくは速度の設定、変更若しくは確認(以下「教示等」という。)(産業用ロボツトの駆動源を遮断して行うものを除く。以下この号において同じ。)又は産業用ロボツトの可動範囲内において当該産業用ロボツトについて教示等を行う労働者と共同して当該産業用ロボツトの可動範囲外において行う当該教示等に係る機器の操作の業務
work related to inspection, repair or adjustment of the industrial robot within its movable range (excluding those corresponding to instruction, etc.), or the confirmation of the result of these actions (hereinafter referred to as "inspection, etc." in this item) (limited to those carried out while the industrial robot is in operation; hereinafter the same applies in this item), or work related to the operation of apparatus pertaining to the inspection, etc. carried out outside of the movable range in cooperation with the worker who carries out the inspection, etc. within the movable range;
out of the work involving the assembly of automobile tires (excluding those for two-wheeled automobiles), the work of filling the tires with air using an air compressor;
自動車(二輪自動車を除く。)用タイヤの組立てに係る業務のうち、空気圧縮機を用いて当該タイヤに空気を充てんする業務
work of handling soot and dust, burnt ash and other burnt residues in waste incineration facilities that have waste incinerators specified in Appended Table 1, item (v) of the Order for Enforcement of the Act on Special Measures against dioxins (Cabinet Order No. 433 of 1999) (hereinafter referred to as "waste incineration facilities" except in Article 90, item (v)-4) (excluding the work listed in item (xxxvi));
work on maintenance and inspection, etc., of equipment such as waste incinerator and dust collector, etc. installed in waste incineration facilities;
廃棄物の焼却施設に設置された廃棄物焼却炉、集じん機等の設備の保守点検等の業務
work of dismantling, etc., equipment such as waste incinerators and dust collectors, etc., installed in waste incineration facilities, and work handling soot and dust, burnt ash and other burnt residues associated with the work; and
廃棄物の焼却施設に設置された廃棄物焼却炉、集じん機等の設備の解体等の業務及びこれに伴うばいじん及び焼却灰その他の燃え殻を取り扱う業務
work pertaining to the operations listed in Article 4, paragraph (1) of the Ordinance on Prevention of Health Impairment due to Asbestos (Order of the Ministry of Health, Labour and Welfare No. 21 of 2005; hereinafter referred to as the "Asbestos Ordinance");
石綿障害予防規則(平成十七年厚生労働省令第二十一号。以下「石綿則」という。)第四条第一項に掲げる作業に係る業務
decontamination, etc. work under Article 2, paragraph (7) of the Decontamination Ordinance and specified dose work under paragraph (8) of the same Article;
除染則第二条第七項の除染等業務及び同条第八項の特定線量下業務
work pertaining to the work of assembling, dismantling or altering scaffoldings (excluding auxiliary work on the ground or on a solid floor);
足場の組立て、解体又は変更の作業に係る業務(地上又は堅固な床上における補助作業の業務を除く。)
work pertaining to work (excluding work on a slope of less than 40 degrees; hereinafter referred to as "rope access work") performed by a worker, at a place of a height of 2 m or more where it is difficult to provide a work floor, using a lifting device (meaning a device by which a worker raises or lowers himself or herself by his or her own operation, that is suspended by a rope tightly tied to an anchorage above the workplace and has attached to that rope a device for holding the body of the worker (referred to as a "body holding device" in Article 539-2 and Article 539-3)) while holding his or her body by that lifting device; and
work pertaining to work performed at a place of a height of 2 m or more where it is difficult to provide a work floor, using fall arrest equipment (meaning the fall arrest equipment set forth in Article 13, paragraph (3), item (xxviii) of the Order; the same applies in Article 130-5, paragraph (1)) of the full harness type (excluding the work listed in the preceding item).
高さが二メートル以上の箇所であつて作業床を設けることが困難なところにおいて、墜落制止用器具(令第十三条第三項第二十八号の墜落制止用器具をいう。第百三十条の五第一項において同じ。)のうちフルハーネス型のものを用いて行う作業に係る業務(前号に掲げる業務を除く。)
略称規定第四条第一項第三号
…発熱反応が行われる反応器等異常化学反応又はこれに類する異常な事態により爆発、火災等を生ずるおそれのあるもの(配管を除く。以下「特殊化学設備」という。)を設置する事業場であつて…
わかりやすく言うと
化学設備(危険物などを製造し、又は取り扱う移動式以外の設備)のうち、発熱反応が行われる反応器など、異常な化学反応などにより爆発や火災などを生ずるおそれのあるもので、配管を除いたもののことです。
略称規定第二十四条の三第一項
法第二十五条の二第一項に規定する事業者(以下この章において「事業者」という。)は、次の各号に掲げる機械、器具その他の設備(以下「機械等」という。)を備え付けなければならない。
わかりやすく言うと
機械、器具その他の設備をまとめた呼び名です。この条では、爆発や火災などの際の作業従事者の救護に備えて事業者が備え付ける、空気呼吸器又は酸素呼吸器、ガスの濃度の測定器具、携帯用照明器具などを指します。
定義第二十四条の六第一項
ずい道及びたて坑以外の坑(採石法(昭和二十五年法律第二百九十一号)第二条に規定する岩石の採取のためのものを除く。)
わかりやすく言うと
ずい道と、たて坑以外の坑をまとめた呼び名です。ただし、採石法で定める花こう岩などの岩石を採取するための坑は含みません。
略称規定第二十四条の十三第一項
労働者に危険を及ぼし、又は労働者の健康障害をその使用により生ずるおそれのある機械(以下単に「機械」という。)を譲渡し、又は貸与する者(次項において「機械譲渡者等」という。)は、文書の交付等により当該機械に関する次に掲げる事項を…
わかりやすく言うと
使うことによって労働者に危険を及ぼし、又は労働者の健康障害を生ずるおそれのある機械のことです。
略称規定第三十六条第一項第二号
動力により駆動されるプレス機械(以下「動力プレス」という。)の金型、シヤーの刃部又はプレス機械若しくはシヤーの安全装置若しくは安全囲いの取付け、取外し又は調整の業務
略称規定第三十六条第一項第五号
最大荷重一トン未満のフオークリフトの運転(道路交通法(昭和三十五年法律第百五号)第二条第一項第一号の道路(以下「道路」という。)上を走行させる運転を除く。)の業務
わかりやすく言うと
道路法の道路、道路運送法の自動車道と、一般の交通に使われるその他の場所のことです(道路交通法第二条第一項第一号)。
定義第三十六条第一項第五号の四
第百五十一条の二第七号の貨物自動車の荷台の後部に設置された動力により駆動されるリフト
わかりやすく言うと
貨物自動車(専ら荷を運ぶ構造の自動車で、不整地運搬車と構内運搬車を除くもの)の荷台の後部に取り付けられた、動力で動くリフトのことです(第百五十一条の二第七号)。
略称規定第三十六条第一項第七号
機械集材装置(集材機、架線、搬器、支柱及びこれらに附属する物により構成され、動力を用いて、原木又は薪炭材(以下「原木等」という。)を巻き上げ、かつ、空中において運搬する設備をいう。以下同じ。)の運転の業務
わかりやすく言うと
原木と薪炭材をまとめた呼び名です。
定義第三十六条第一項第七号
集材機、架線、搬器、支柱及びこれらに附属する物により構成され、動力を用いて、原木又は薪炭材(以下「原木等」という。)を巻き上げ、かつ、空中において運搬する設備
定義第三十六条第一項第七号の二
動力を用いて原木等を巻き上げることにより当該原木等を運搬するための機械であつて、動力を用い、かつ、不特定の場所に自走できるもの
定義第三十六条第一項第七号の二
集材機、架線、搬器、支柱及びこれらに附属する物により構成され、動力を用いて、原木等を巻き上げ、かつ、原木等の一部が地面に接した状態で運搬する設備
定義第三十六条第一項第十号の四
複数の保持機構(ワイヤロープ等を締め付けること等によつて保持する機構をいう。以下同じ。)を有し、当該保持機構を交互に開閉し、保持機構間を動力を用いて伸縮させることにより荷のつり上げ、つり下げ等の作業をワイヤロープ等を介して行う機械
わかりやすく言うと
ワイヤロープなどを締め付けることなどで保持する保持機構を複数持ち、それを交互に開閉しながら保持機構の間を動力で伸び縮みさせて、ワイヤロープなどを介して荷のつり上げやつり下げなどを行う機械です。
定義第三十六条第一項第十号の五
令第十条第七号の高所作業車
わかりやすく言うと
作業床の高さ(作業床を最も高く上げたときの床面の高さ)が二メートル以上の高所作業車のことです(労働安全衛生法施行令第十条第七号)。
定義第三十六条第一項第十四号
令第一条第四号の小型ボイラー
わかりやすく言うと
ボイラーのうち、ゲージ圧力や伝熱面積、胴の大きさなどが一定以下のものとして、労働安全衛生法施行令第一条第四号に掲げるもののことです。
定義第三十六条第一項第十五号
令第一条第八号の移動式クレーン
わかりやすく言うと
原動機を内蔵し、不特定の場所に移動させることができるクレーンのことです(労働安全衛生法施行令第一条第八号)。
定義第三十六条第一項第二十八号・この規定及び第三十六条第一項第二十九号及び第二十八号の三の中だけ
電離放射線障害防止規則(昭和四十七年労働省令第四十一号。以下「電離則」という。)第三条第一項に規定する管理区域
わかりやすく言うと
放射線業務を行う事業者が標識で示さなければならない区域で、外部放射線と空気中の放射性物質による実効線量の合計が三月間につき一・三ミリシーベルトを超えるおそれのある区域などのことです(電離放射線障害防止規則第三条第一項)。
略称規定第三十六条第一項第二十八号
エックス線装置又はガンマ線照射装置を取り扱う業務(装置の内部にのみ管理区域(電離放射線障害防止規則(昭和四十七年労働省令第四十一号。以下「電離則」という。)第三条第一項に規定する管理区域をいう。次号及び第二十八号の三において同じ。)が存在…
わかりやすく言うと
電離放射線障害防止規則(昭和四十七年労働省令第四十一号)を指す呼び名です。
定義第三十六条第一項第二十八号の二・この規定及び第三十六条第一項第二十八号の三の中だけ
核原料物質、核燃料物質及び原子炉の規制に関する法律第二条第十項に規定する使用済燃料
わかりやすく言うと
原子炉で燃料として使った核燃料物質その他原子核分裂をさせた核燃料物質のことです(核原料物質、核燃料物質及び原子炉の規制に関する法律第二条第十項)。
定義第三十六条第一項第二十八号の二・この規定及び第三十六条第一項第二十八号の三の中だけ
原子力基本法(昭和三十年法律第百八十六号)第三条第二号に規定する核燃料物質
わかりやすく言うと
ウラン、トリウムなど、原子核分裂の過程で高いエネルギーを出す物質で、政令で定めるもののことです(原子力基本法第三条第二号)。
略称規定第三十六条第一項第二十八号の四
東日本大震災により生じた放射性物質により汚染された土壌等を除染するための業務等に係る電離放射線障害防止規則(平成二十三年厚生労働省令第百五十二号。以下「除染則」という。)第二条第七項第二号イ又はロに掲げる物その他の事故由来放射性物質(平成…
わかりやすく言うと
東日本大震災により生じた放射性物質により汚染された土壌等を除染するための業務等に係る電離放射線障害防止規則(平成二十三年厚生労働省令第百五十二号)を指す呼び名です。
略称規定第三十六条第一項第二十九号
粉じん障害防止規則(昭和五十四年労働省令第十八号。以下「粉じん則」という。)第二条第一項第三号の特定粉じん作業(設備による注水又は注油をしながら行う粉じん則第三条各号に掲げる作業に該当するものを除く。)に係る業務
わかりやすく言うと
粉じん障害防止規則(昭和五十四年労働省令第十八号)を指す呼び名です。
略称規定第三十六条第一項第三十一号
…位置若しくは速度の設定、変更若しくは確認(以下「教示等」という。)(産業用ロボツトの駆動源を遮断して行うものを除く。以下この号において同じ。)又は産業用ロボツトの可動範囲内において当該産業用ロボツトについて教示等を行う労働者と共同して当…
わかりやすく言うと
産業用ロボットの可動範囲の中で、そのロボットについて行う、マニプレータの動作の順序、位置又は速度の設定、変更又は確認のことです。
略称規定第三十六条第一項第三十一号
…記憶装置の情報に基づきマニプレータの伸縮、屈伸、上下移動、左右移動若しくは旋回の動作又はこれらの複合動作を自動的に行うことができる機械(研究開発中のものその他厚生労働大臣が定めるものを除く。以下「産業用ロボツト」という。)の可動範囲(記…
わかりやすく言うと
マニプレータと記憶装置を持ち、記憶装置の情報に基づいてマニプレータの伸縮、屈伸、上下や左右の移動、旋回などの動作を自動的に行うことができる機械のことです。研究開発中のものなど、厚生労働大臣が定めるものは除きます。
略称規定第三十六条第一項第三十二号・この号の中だけ
産業用ロボツトの可動範囲内において行う当該産業用ロボツトの検査、修理若しくは調整(教示等に該当するものを除く。)若しくはこれらの結果の確認(以下この号において「検査等」という。)(産業用ロボツトの運転中に行うものに限る。以下この号において…
わかりやすく言うと
産業用ロボットの可動範囲内で行う、そのロボットの検査、修理又は調整と、それらの結果の確認のことです。マニプレータの動作の設定などの教示等に当たるものは除きます。この号では、ロボットの運転中に行うものに限られます。
略称規定第三十六条第一項第三十四号・この規定以降に適用(第九十条第一項第五号の四を除く)
ダイオキシン類対策特別措置法施行令(平成十一年政令第四百三十三号)別表第一第五号に掲げる廃棄物焼却炉を有する廃棄物の焼却施設(第九十条第五号の四を除き、以下「廃棄物の焼却施設」という。)においてばいじん及び焼却灰その他の燃え殻を取り扱う業…
わかりやすく言うと
火床面積が〇・五平方メートル以上か、焼却能力が一時間当たり五十キログラム以上の廃棄物焼却炉(二以上あるときは合計)を持つ、廃棄物の焼却施設のことです(ダイオキシン類対策特別措置法施行令別表第一第五号)。
略称規定第三十六条第一項第三十七号
石綿障害予防規則(平成十七年厚生労働省令第二十一号。以下「石綿則」という。)第四条第一項に掲げる作業に係る業務
わかりやすく言うと
石綿障害予防規則(平成十七年厚生労働省令第二十一号)を指す呼び名です。
略称規定第三十六条第一項第四十号
…労働者が当該昇降器具により身体を保持しつつ行う作業(四十度未満の斜面における作業を除く。以下「ロープ高所作業」という。)に係る業務
わかりやすく言うと
高さ二メートル以上で作業床を設けにくい場所で、上方の支持物につり下げたロープに身体を保持する器具を取り付けた昇降器具を使い、労働者が自ら昇り降りしつつ身体を保持して行う作業のことです。四十度未満の斜面での作業は除きます。
略称規定第三十六条第一項第四十号・この規定及び第五百三十九条の二及び第五百三十九条の三の中だけ
…昇降器具(労働者自らの操作により上昇し、又は下降するための器具であつて、作業箇所の上方にある支持物にロープを緊結してつり下げ、当該ロープに労働者の身体を保持するための器具(第五百三十九条の二及び第五百三十九条の三において「身体保持器具」…
わかりやすく言うと
ロープ高所作業で使う昇降器具のうち、作業箇所の上方の支持物に緊結してつり下げたロープに取り付けて、労働者の身体を保持するための器具のことです。
定義第三十六条第一項第四十一号・この規定及び第百三十条の五第一項の中だけ
令第十三条第三項第二十八号の墜落制止用器具
わかりやすく言うと
厚生労働大臣が定める規格又は安全装置を備えなければ譲渡、貸与、設置ができない機械等の一つとして、労働安全衛生法施行令第十三条第三項第二十八号に掲げられた墜落制止用器具のことです。