In the case set forth in Article 31, paragraph (1) of the Act, when the orderer has persons engaged in work pertaining to the contractor use alternating current arc welding equipment (excluding automatic welding equipment), the orderer must provide the alternating current arc welding equipment with an automatic voltage reducing device which complies with the standards provided by the Minister of Health, Labour and Welfare pursuant to the provisions of Article 42 of the Act; provided, however, that this does not apply when the equipment is used at places other than the following places:
the inside of a double-bottomed vessel or peak tank and other very confined places surrounded by electric conductors; and
船舶の二重底又はピークタンクの内部その他導電体に囲まれた著しく狭あいな場所
places at a height of 2 m or more where there is a risk of endangering persons engaged in work due to falling, and where there is a risk of persons engaged in work coming into contact with highly conductive grounded objects such as steel frames.
墜落により作業従事者に危険を及ぼすおそれのある高さが二メートル以上の場所で、鉄骨等導電性の高い接地物に作業従事者が接触するおそれのあるところ
略称規定第六百四十四条第一項
法第三十一条第一項の注文者(以下「注文者」という。)は、同項の場合において、請負人(同項の請負人をいう。以下この章において同じ。)に係る作業従事者にくい打機又はくい抜機を使用させるときは、当該くい打機又はくい抜機については…
わかりやすく言うと
建設業その他政令で定める業種の事業の仕事を、自らも行う注文者のことです(労働安全衛生法第三十一条第一項)。
定義第六百四十四条第一項・この章の中だけ
同項の請負人
わかりやすく言うと
建設業などの特定事業の仕事を自ら行う注文者の請負人のことで、仕事が何段階もの請負で行われるときは、その後に続く全ての請負契約の請負人を含みます(労働安全衛生法第三十一条第一項)。