Search

Search provisions, jump to a law or an article

1 article

Article 648Measures Concerning Alternating-Current Arc Welding Equipment

第六百四十八条(交流アーク溶接機についての措置)

Changes on (Ministry of Health, Labour and Welfare Order No. 29 of 2026)

In the case set forth in Article 31, paragraph (1) of the Act, when the orderer has persons engaged in work pertaining to the contractor use alternating current arc welding equipment (excluding automatic welding equipment), the orderer must provide the alternating current arc welding equipment with an automatic voltage reducing device which complies with the standards provided by the Minister of Health, Labour and Welfare pursuant to the provisions of Article 42 of the Act; provided, however, that this does not apply when the equipment is used at places other than the following places:

注文者は、法第三十一条第一項の場合において、請負人に係る作業従事者に交流アーク溶接機(自動溶接機を除く。)を使用させるときは、当該交流アーク溶接機に、法第四十二条の規定に基づき厚生労働大臣が定める規格に適合する交流アーク溶接機用自動電撃防止装置を備えなければならない。ただし、次の場所以外の場所において使用させるときは、この限りでない。

the inside of a double-bottomed vessel or peak tank and other very confined places surrounded by electric conductors; and

船舶の二重底又はピークタンクの内部その他導電体に囲まれた著しく狭あいな場所

places at a height of 2 m or more where there is a risk of endangering persons engaged in work due to falling, and where there is a risk of persons engaged in work coming into contact with highly conductive grounded objects such as steel frames.

墜落により作業従事者に危険を及ぼすおそれのある高さが二メートル以上の場所で、鉄骨等導電性の高い接地物に作業従事者が接触するおそれのあるところ

Read this with the articles around it

© 2026 japanlaw.orgA copy for reading and reference — not an official source, and not legal advice. Only the Japanese text published by the government has legal effect.Run by Genjido LLC (源氏道合同会社) · contact@genjido.comContactSourcesTermsPrivacy