In the case set forth in Article 31, paragraph (1) of the Act, when the orderer has persons engaged in work pertaining to the contractor use acetylene welding equipment, the orderer must take the following measures concerning the acetylene welding equipment:
to install the acetylene welding equipment in an acetylene gas generator room which complies with the standards of the acetylene gas generator room prescribed in Article 302, paragraph (2) and (3) and Article 303;
to ensure that the acetylene welding equipment which generates or uses the acetylene gas of a pressure of 7 kPa or more, complies with the standards prescribed in Article 305, paragraph (1);
to not use copper as regards the purifier and conduits of the acetylene welding equipment other than that set forth in the preceding item, for the part which has a risk of coming into contact with acetylene gas;
to conform the acetylene gas generator and safety equipment to the standards provided by the Minister of Health, Labour and Welfare pursuant to the provisions of Article 42 of the Act; and
to conform the safety equipment to the standards prescribed in Article 306.
安全器の設置については、第三百六条に規定する基準に適合するものとすること。
定義第三百一条第一項
令第一条第一号に掲げるアセチレン溶接装置
わかりやすく言うと
アセチレン発生器、安全器、導管、吹管などで構成され、溶解アセチレン以外のアセチレンと酸素を使って、金属を溶接し、溶断し、又は加熱する設備のことです(労働安全衛生法施行令第一条第一号)。
略称規定第三百二条第一項
事業者は、アセチレン溶接装置のアセチレン発生器(以下「発生器」という。)については、専用の発生器室(以下「発生器室」という。)内に設けなければならない。
略称規定第三百二条第一項
事業者は、アセチレン溶接装置のアセチレン発生器(以下「発生器」という。)については、専用の発生器室(以下「発生器室」という。)内に設けなければならない。
略称規定第六百四十四条第一項
法第三十一条第一項の注文者(以下「注文者」という。)は、同項の場合において、請負人(同項の請負人をいう。以下この章において同じ。)に係る作業従事者にくい打機又はくい抜機を使用させるときは、当該くい打機又はくい抜機については…
わかりやすく言うと
建設業その他政令で定める業種の事業の仕事を、自らも行う注文者のことです(労働安全衛生法第三十一条第一項)。
定義第六百四十四条第一項・この章の中だけ
同項の請負人
わかりやすく言うと
建設業などの特定事業の仕事を自ら行う注文者の請負人のことで、仕事が何段階もの請負で行われるときは、その後に続く全ての請負契約の請負人を含みます(労働安全衛生法第三十一条第一項)。