Search

Search provisions, jump to a law or an article

1 article

Article 647Measures Concerning Acetylene Welding Equipment

第六百四十七条(アセチレン溶接装置についての措置)

In the case set forth in Article 31, paragraph (1) of the Act, when the orderer has persons engaged in work pertaining to the contractor use acetylene welding equipment, the orderer must take the following measures concerning the acetylene welding equipment:

注文者は、法第三十一条第一項の場合において、請負人に係る作業従事者にアセチレン溶接装置を使用させるときは、当該アセチレン溶接装置について、次の措置を講じなければならない。

to install the acetylene welding equipment in an acetylene gas generator room which complies with the standards of the acetylene gas generator room prescribed in Article 302, paragraph (2) and (3) and Article 303;

第三百二条第二項及び第三項並びに第三百三条に規定する発生器室の基準に適合する発生器室内に設けること。

to ensure that the acetylene welding equipment which generates or uses the acetylene gas of a pressure of 7 kPa or more, complies with the standards prescribed in Article 305, paragraph (1);

ゲージ圧力七キロパスカル以上のアセチレンを発生し、又は使用するアセチレン溶接装置にあつては、第三百五条第一項に規定する基準に適合するものとすること。

to not use copper as regards the purifier and conduits of the acetylene welding equipment other than that set forth in the preceding item, for the part which has a risk of coming into contact with acetylene gas;

前号のアセチレン溶接装置以外のアセチレン溶接装置の清浄器、導管等でアセチレンが接触するおそれのある部分には、銅を使用しないこと。

Changes on (Ministry of Health, Labour and Welfare Order No. 29 of 2026)

to conform the acetylene gas generator and safety equipment to the standards provided by the Minister of Health, Labour and Welfare pursuant to the provisions of Article 42 of the Act; and

発生器及び安全器は、法第四十二条の規定に基づき厚生労働大臣が定める規格に適合するものとすること。

to conform the safety equipment to the standards prescribed in Article 306.

安全器の設置については、第三百六条に規定する基準に適合するものとすること。

Read this with the articles around it

© 2026 japanlaw.orgA copy for reading and reference — not an official source, and not legal advice. Only the Japanese text published by the government has legal effect.Run by Genjido LLC (源氏道合同会社) · contact@genjido.comContactSourcesTermsPrivacy