When traveling a vehicle for work at height with a structure of carrying out the traveling operation on a working floor at places other than level and firm places, the employer must take the following measures:
事業者は、作業床において走行の操作をする構造の高所作業車を平坦で堅固な場所以外の場所で走行させるときは、次の措置を講じなければならない。
to take the measures listed in paragraph (1), items (i) and (ii) of the preceding Article; and
to establish in advance, an appropriate working speed limit for the vehicle for work at height in accordance with the height of the working floor and the length of the boom of the vehicle for work at height, and the landform and condition of the ground pertaining to the work, and have the operator operate the vehicle within the speed limit.
あらかじめ、作業時における当該高所作業車の作業床の高さ及びブームの長さ、作業に係る場所の地形及び地盤の状態等に応じた高所作業車の適正な制限速度を定め、それにより運転者に運転させること。
The provisions of paragraph (3) of the preceding Article apply mutatis mutandis to the operator of the vehicle for work at height set forth in the preceding paragraph. In this case, the term "item (iii) of the same paragraph" in paragraph (3) of the same Article is deemed to be replaced with "paragraph (1), item (ii) of the following Article."
定義第三十六条第一項第十号の五
令第十条第七号の高所作業車
わかりやすく言うと
作業床の高さ(作業床を最も高く上げたときの床面の高さ)が二メートル以上の高所作業車のことです(労働安全衛生法施行令第十条第七号)。