Search

Search provisions, jump to a law or an article

1 article

Article 194-21

第百九十四条の二十一

When traveling a vehicle for work at height with a structure of carrying out the traveling operation on a working floor at places other than level and firm places, the employer must take the following measures:

事業者は、作業床において走行の操作をする構造の高所作業車を平坦で堅固な場所以外の場所で走行させるときは、次の措置を講じなければならない。

to take the measures listed in paragraph (1), items (i) and (ii) of the preceding Article; and

前条第一項第一号及び第二号に掲げる措置を講ずること。

to establish in advance, an appropriate working speed limit for the vehicle for work at height in accordance with the height of the working floor and the length of the boom of the vehicle for work at height, and the landform and condition of the ground pertaining to the work, and have the operator operate the vehicle within the speed limit.

あらかじめ、作業時における当該高所作業車の作業床の高さ及びブームの長さ、作業に係る場所の地形及び地盤の状態等に応じた高所作業車の適正な制限速度を定め、それにより運転者に運転させること。

The provisions of paragraph (3) of the preceding Article apply mutatis mutandis to the operator of the vehicle for work at height set forth in the preceding paragraph. In this case, the term "" in paragraph (3) of the same Article is deemed to be replaced with "paragraph (1), item (ii) of the following Article."

前条第三項の規定は、前項の高所作業車の運転者について準用する。この場合において、同条第三項中「」とあるのは、「次条第一項第二号」と読み替えるものとする。

Read this with the articles around it

© 2026 japanlaw.orgA copy for reading and reference — not an official source, and not legal advice. Only the Japanese text published by the government has legal effect.Run by Genjido LLC (源氏道合同会社) · contact@genjido.comContactSourcesTermsPrivacy