When the work of fitting, removing or adjusting the dies of a power press is carried out, and when a part of the body of the worker engaging in the work goes beyond the danger limit, the employer must have the worker take such measures as using a safety block, etc., in order to prevent the worker from dangers due to unexpected descent of the slide.
事業者は、動力プレスの金型の取付け、取外し又は調整の作業を行う場合において、当該作業に従事する労働者の身体の一部が危険限界に入るときは、スライドが不意に下降することによる労働者の危険を防止するため、当該作業に従事する労働者に安全ブロツクを使用させる等の措置を講じさせなければならない。
The worker engaging in the work set forth in the preceding paragraph must take measures of using a safety block, etc., set forth in the same paragraph.
略称規定第三十六条第一項第二号
動力により駆動されるプレス機械(以下「動力プレス」という。)の金型、シヤーの刃部又はプレス機械若しくはシヤーの安全装置若しくは安全囲いの取付け、取外し又は調整の業務