Search

Search provisions, jump to a law or an article

1 article

Article 131-2Prevention of Dangers Due to Descent of a Slide

第百三十一条の二(スライドの下降による危険の防止)

When the work of fitting, removing or adjusting the dies of a power press is carried out, and when a part of the body of the worker engaging in the work goes beyond the danger limit, the employer must have the worker take such measures as using a safety block, etc., in order to prevent the worker from dangers due to unexpected descent of the slide.

事業者は、動力プレスの金型の取付け、取外し又は調整の作業を行う場合において、当該作業に従事する労働者の身体の一部が危険限界に入るときは、スライドが不意に下降することによる労働者の危険を防止するため、当該作業に従事する労働者に安全ブロツクを使用させる等の措置を講じさせなければならない。

The worker engaging in the work set forth in the preceding paragraph must take measures of using a safety block, etc., set forth in the same paragraph.

前項の作業に従事する労働者は、同項の安全ブロツクを使用する等の措置を講じなければならない。

Read this with the articles around it

© 2026 japanlaw.orgA copy for reading and reference — not an official source, and not legal advice. Only the Japanese text published by the government has legal effect.Run by Genjido LLC (源氏道合同会社) · contact@genjido.comContactSourcesTermsPrivacy