When carrying out the excavating work for quarrying (excluding the work in a pit; hereinafter the same applies in this Article), the employer must make the gradient of the excavation surface equivalent to or less than the value listed in the right column of the following Table in accordance with the type of natural ground listed in the left column of the same Table and the height of the excavation surface listed in the middle column of the same Table, respectively; provided however, that this does not apply to the case of carrying out the excavating work using excavating machines such as a power shovel and a tractor shovel, and when there is no risk of endangering the operator of the excavating machine due to collapse of natural ground or falling of earth and rocks:
| Type of Natural Ground | Height of Excavation Surface (Unit: m) | Gradient of Excavation Surface (Unit: Degrees) |
| (1) Natural ground composed of rock beds having no cracks that may cause collapse or fall | Less than 20 | 90 |
| 20 or more | 75 | |
| (2) Natural ground composed of rock beds other than those listed in the preceding item | Less than 5 | 90 |
| 5 or more | 60 | |
| (3) Natural ground other than those listed in each of the preceding items | Less than 2 | 90 |
| 2 or more | 45 |
事業者は、岩石の採取のための掘削の作業(坑内におけるものを除く。以下この条において同じ。)を行なうときは、掘削面のこう配を、次の表の上欄に掲げる地山の種類及び同表の中欄に掲げる掘削面の高さに応じ、それぞれ同表の下欄に掲げる値以下としなければならない。ただし、パワー・シヨベル、トラクター・シヨベル等の掘削機械を用いて掘削の作業を行なう場合において、地山の崩壊又は土石の落下により当該機械の運転者に危険を及ぼすおそれのないときは、この限りでない。
| 地山の種類 | 掘削面の高さ(単位 メートル) | 掘削面のこう配(単位 度) |
| 一 崩壊又は落下の原因となるき裂がない岩盤からなる地山 | 二十未満 | 九十 |
| 二十以上 | 七十五 | |
| 二 前号の岩盤以外の岩盤からなる地山 | 五未満 | 九十 |
| 五以上 | 六十 | |
| 三 前各号に掲げる地山以外の地山 | 二未満 | 九十 |
| 二以上 | 四十五 |
略称規定第二十四条の十三第一項
労働者に危険を及ぼし、又は労働者の健康障害をその使用により生ずるおそれのある機械(以下単に「機械」という。)を譲渡し、又は貸与する者(次項において「機械譲渡者等」という。)は、文書の交付等により当該機械に関する次に掲げる事項を…
わかりやすく言うと
使うことによって労働者に危険を及ぼし、又は労働者の健康障害を生ずるおそれのある機械のことです。