Search

Search provisions, jump to a law or an article

1 article

Article 407Standards for Gradient of Excavation Surface

第四百七条(掘削面のこう配の基準)

When carrying out the excavating work for quarrying (excluding the work in a pit; hereinafter the same applies in this Article), the employer must make the gradient of the excavation surface equivalent to or less than the value listed in the right column of the following Table in accordance with the type of natural ground listed in the left column of the same Table and the height of the excavation surface listed in the middle column of the same Table, respectively; provided however, that this does not apply to the case of carrying out the excavating work using excavating machines such as a power shovel and a tractor shovel, and when there is no risk of endangering the operator of the excavating machine due to collapse of natural ground or falling of earth and rocks:

Type of Natural GroundHeight of Excavation Surface (Unit: m)Gradient of Excavation Surface (Unit: Degrees)
(1) Natural ground composed of rock beds having no cracks that may cause collapse or fallLess than 2090
20 or more75
(2) Natural ground composed of rock beds other than those listed in Less than 590
5 or more60
(3) Natural ground other than those listed in Less than 290
2 or more45

事業者は、岩石の採取のための掘削の作業(坑内におけるものを除く。以下この条において同じ。)を行なうときは、掘削面のこう配を、次の表の上欄に掲げる地山の種類及び同表の中欄に掲げる掘削面の高さに応じ、それぞれ同表の下欄に掲げる値以下としなければならない。ただし、パワー・シヨベル、トラクター・シヨベル等の掘削機械を用いて掘削の作業を行なう場合において、地山の崩壊又は土石の落下により当該機械の運転者に危険を及ぼすおそれのないときは、この限りでない。

地山の種類掘削面の高さ(単位 メートル)掘削面のこう配(単位 度)
一 崩壊又は落下の原因となるき裂がない岩盤からなる地山二十未満九十
二十以上七十五
二 の岩盤以外の岩盤からなる地山五未満九十
五以上六十
三 に掲げる地山以外の地山二未満九十
二以上四十五

Read this with the articles around it

© 2026 japanlaw.orgA copy for reading and reference — not an official source, and not legal advice. Only the Japanese text published by the government has legal effect.Run by Genjido LLC (源氏道合同会社) · contact@genjido.comContactSourcesTermsPrivacy