As regards energized parts of electric machine and appliance (excluding the energized parts of electric machine and appliance which are inevitable to be exposed for the purpose of their use such as heating unit of electric heaters, the welding rods of resistance welding machines) which is liable to cause danger of electric shocks to workers when they come into contact (including contact via an electric conductor; hereinafter the same applies in this Chapter) or come in proximity to these parts during work or when passing through, the employer must install enclosures or insulating covers in order to prevent electric shocks; provided, however, that this does not apply to the electric machine and appliance which is installed in an enclosed place such as a switchboard room and substation room where the employer prohibited persons other than those who are engaged in the work set forth in Article 36, item (iv) (hereinafter referred to as "electrician") from entering, or installed on detached place such as a pole and a tower where there is no possibility that persons other than electrician will come in proximity to them.
事業者は、電気機械器具の充電部分(電熱器の発熱体の部分、抵抗溶接機の電極の部分等電気機械器具の使用の目的により露出することがやむを得ない充電部分を除く。)で、労働者が作業中又は通行の際に、接触(導電体を介する接触を含む。以下この章において同じ。)し、又は接近することにより感電の危険を生ずるおそれのあるものについては、感電を防止するための囲い又は絶縁覆いを設けなければならない。ただし、配電盤室、変電室等区画された場所で、事業者が第三十六条第四号の業務に就いている者(以下「電気取扱者」という。)以外の者の立入りを禁止したところに設置し、又は電柱上、塔上等隔離された場所で、電気取扱者以外の者が接近するおそれのないところに設置する電気機械器具については、この限りでない。
定義第二百八十条第一項
電動機、変圧器、コード接続器、開閉器、分電盤、配電盤等電気を通ずる機械、器具その他の設備のうち配線及び移動電線以外のもの
略称規定第三百二十九条第一項
ただし、配電盤室、変電室等区画された場所で、事業者が第三十六条第四号の業務に就いている者(以下「電気取扱者」という。)以外の者の立入りを禁止したところに設置し、又は電柱上、塔上等隔離された場所で…
わかりやすく言うと
高圧や特別高圧の充電電路の敷設、点検、修理、操作の業務や、低圧の充電電路の敷設や修理の業務など、特別教育が必要な電気の業務(第三十六条第四号)に就いている者のことです。