When carrying out work of welding, fusing or heating metal using an acetylene welding equipment, the employer must have the operations supervisor of gas welding carry out the following matters:
事業者は、アセチレン溶接装置を用いて金属の溶接、溶断又は加熱の作業を行なうときは、ガス溶接作業主任者に、次の事項を行なわせなければならない。
to decide the work method, and supervise the work;
作業の方法を決定し、作業を指揮すること。
to have the worker engaging in handling acetylene welding equipment carry out the following matters:
アセチレン溶接装置の取扱いに従事する労働者に次の事項を行なわせること。
to not use a tool which is likely to produce sparks for, or give shocks to, the generator being used;
使用中の発生器に、火花を発するおそれのある工具を使用し、又は衝撃を与えないこと。
when inspecting gas leakage from acetylene welding equipment, to use a safe method such as using soap water;
アセチレン溶接装置のガス漏れを点検するときは、石けん水を使用する等安全な方法によること。
to not leave the door of the entrance to the generator room open;
発生器室の出入口の戸を開放しておかないこと。
when recharging carbide to the generator of portable acetylene welding equipment, to carry out the operations at a safe place outdoors; and
when opening a carbide can, to not perform acts that are likely to produce sparks, such as giving shocks;
カーバイド罐を開封するときは、衝撃その他火花を発するおそれのある行為をしないこと。
when starting the work, to inspect the acetylene welding equipment, and when a mixed gas of air and acetylene exists in the generator, to remove the mixed gas;
to place the safety equipment at a place where its water-level can easily be inspected during operations, and inspect the safety device more than once a day;
安全器は、作業中、その水位を容易に確かめることができる箇所に置き、かつ、一日一回以上これを点検すること。
when keeping the acetylene welding equipment warm or heating the equipment to prevent water in the equipment from freezing, to use a safe method, such as using warm water or steam;
アセチレン溶接装置内の水の凍結を防ぐために、保温し、又は加温するときは、温水又は蒸気を使用する等安全な方法によること。
when suspending the use of the generator, to keep the water level in its water chamber in a condition that the water and residual carbide may not come into contact each other;
発生器の使用を休止するときは、その水室の水位を水と残留カーバイドが接触しない状態に保つこと。
when repairing, processing, transporting or storing the generator, or suspending its use continuously, to completely remove the acetylene and carbide from the generator;
発生器の修繕、加工、運搬若しくは格納をしようとするとき、又はその使用を継続して休止しようとするときは、アセチレン及びカーバイドを完全に除去すること。
to dispose carbide sludge in a safe manner such as keeping it in a sludge pit until the danger due to gas is removed;
カーバイドのかすは、ガスによる危険がなくなるまでかすだめに入れる等安全に処置すること。
to monitor the use of eye protector and protective gloves by workers engaged in the work; and
当該作業に従事する労働者の保護眼鏡及び保護手袋の使用状況を監視すること。
to carry the license of operations supervisor of gas welding.
ガス溶接作業主任者免許証を携帯すること。
定義第三百一条第一項
令第一条第一号に掲げるアセチレン溶接装置
わかりやすく言うと
アセチレン発生器、安全器、導管、吹管などで構成され、溶解アセチレン以外のアセチレンと酸素を使って、金属を溶接し、溶断し、又は加熱する設備のことです(労働安全衛生法施行令第一条第一号)。
略称規定第三百二条第一項
事業者は、アセチレン溶接装置のアセチレン発生器(以下「発生器」という。)については、専用の発生器室(以下「発生器室」という。)内に設けなければならない。
略称規定第三百二条第一項
事業者は、アセチレン溶接装置のアセチレン発生器(以下「発生器」という。)については、専用の発生器室(以下「発生器室」という。)内に設けなければならない。
作業主任者
高圧室内作業その他の労働災害を防止するための管理が必要な作業で政令で定めるものについて、事業者が、作業の区分に応じて選任しなければならない人で、その作業に従事する労働者の指揮その他の厚生労働省令で定める事項を行います(労働安全衛生法第十四条)。都道府県労働局長の免許を受けた人か、都道府県労働局長の登録を受けた者が行う技能講習を修了した人の中から選びます(同条)。政令で定める業種の事業場では、新たに職長など作業中の労働者を直接指導や監督する立場についた人に安全や衛生のための教育を行わなければなりませんが、作業主任者はその対象から除かれています(同法第六十条第一項)。
労働安全衛生法第14条・第60条を参考にAIが作成。