Search

Search provisions, jump to a law or an article

1 article

Article 315Duties of an Operations Supervisor of Gas Welding

第三百十五条(ガス溶接作業主任者の職務)

When carrying out work of welding, fusing or heating metal using an acetylene welding equipment, the employer must have the operations supervisor of gas welding carry out the following matters:

事業者は、アセチレン溶接装置を用いて金属の溶接、溶断又は加熱の作業を行なうときは、ガス溶接作業主任者に、次の事項を行なわせなければならない。

to decide the work method, and supervise the work;

作業の方法を決定し、作業を指揮すること。

to have the worker engaging in handling acetylene welding equipment carry out the following matters:

アセチレン溶接装置の取扱いに従事する労働者に次の事項を行なわせること。

to not use a tool which is likely to produce sparks for, or give shocks to, the generator being used;

使用中の発生器に、火花を発するおそれのある工具を使用し、又は衝撃を与えないこと。

when inspecting gas leakage from acetylene welding equipment, to use a safe method such as using soap water;

アセチレン溶接装置のガス漏れを点検するときは、石けん水を使用する等安全な方法によること。

to not put things on the gas bell of the generator without reason;

発生器の気鐘の上にみだりに物を置かないこと。

to not leave the door of the entrance to the generator room open;

発生器室の出入口の戸を開放しておかないこと。

when recharging carbide to the generator of portable acetylene welding equipment, to carry out the operations at a safe place outdoors; and

移動式のアセチレン溶接装置の発生器にカーバイドを詰め替えるときは、屋外の安全な場所で行なうこと。

when opening a carbide can, to not perform acts that are likely to produce sparks, such as giving shocks;

カーバイド罐を開封するときは、衝撃その他火花を発するおそれのある行為をしないこと。

when starting the work, to inspect the acetylene welding equipment, and when a mixed gas of air and acetylene exists in the generator, to remove the mixed gas;

当該作業を開始するときは、アセチレン溶接装置を点検し、かつ、発生器内に空気とアセチレンの混合ガスが存在するときは、これを排除すること。

to place the safety equipment at a place where its water-level can easily be inspected during operations, and inspect the safety device more than once a day;

安全器は、作業中、その水位を容易に確かめることができる箇所に置き、かつ、一日一回以上これを点検すること。

when keeping the acetylene welding equipment warm or heating the equipment to prevent water in the equipment from freezing, to use a safe method, such as using warm water or steam;

アセチレン溶接装置内の水の凍結を防ぐために、保温し、又は加温するときは、温水又は蒸気を使用する等安全な方法によること。

when suspending the use of the generator, to keep the water level in its water chamber in a condition that the water and residual carbide may not come into contact each other;

発生器の使用を休止するときは、その水室の水位を水と残留カーバイドが接触しない状態に保つこと。

when repairing, processing, transporting or storing the generator, or suspending its use continuously, to completely remove the acetylene and carbide from the generator;

発生器の修繕、加工、運搬若しくは格納をしようとするとき、又はその使用を継続して休止しようとするときは、アセチレン及びカーバイドを完全に除去すること。

to dispose carbide sludge in a safe manner such as keeping it in a sludge pit until the danger due to gas is removed;

カーバイドのかすは、ガスによる危険がなくなるまでかすだめに入れる等安全に処置すること。

to monitor the use of eye protector and protective gloves by workers engaged in the work; and

当該作業に従事する労働者の保護眼鏡及び保護手袋の使用状況を監視すること。

to carry the license of operations supervisor of gas welding.

ガス溶接作業主任者免許証を携帯すること。

Read this with the articles around it

© 2026 japanlaw.orgA copy for reading and reference — not an official source, and not legal advice. Only the Japanese text published by the government has legal effect.Run by Genjido LLC (源氏道合同会社) · contact@genjido.comContactSourcesTermsPrivacy