As regards the piping of the gas welding equipment using manifolds listed in Article 1, item (ii) of the Order (hereinafter referred to as "the gas welding equipment using manifolds"), the employer must conform to the requirements set forth in the following items:
事業者は、令第一条第二号に掲げるガス集合溶接装置(以下「ガス集合溶接装置」という。)の配管については、次に定めるところによらなければならない。
for the joining part of a flange, a valve, a cock, etc., to take measures such as using gaskets and bringing the joining surfaces into close contact with each other; and
フランジ、バルブ、コツク等の接合部には、ガスケツトを使用し、接合面を相互に密接させる等の措置を講ずること。
to install a safety equipment for the main pipe and branch pipes. In this case, to install two or more safety equipment for each blowpipe.
主管及び分岐管には、安全器を設けること。この場合において、一の吹管について、安全器が二以上になるようにすること。
略称規定第三百十条第一項
事業者は、令第一条第二号に掲げるガス集合溶接装置(以下「ガス集合溶接装置」という。)の配管については、次に定めるところによらなければならない。
わかりやすく言うと
ガス集合装置(可燃性ガスの容器を導管でつないだ一定規模以上の装置)、安全器、圧力調整器、導管、吹管などで構成され、可燃性ガスと酸素を使って金属を溶接し、溶断し、又は加熱する設備のことです(労働安全衛生法施行令第一条第二号)。