As regards the piping of the gas welding equipment using manifolds listed in Article 1, item (ii) of the Order (hereinafter referred to as "the gas welding equipment using manifolds"), the employer must conform to the requirements set forth in the following items:
事業者は、令第一条第二号に掲げるガス集合溶接装置(以下「ガス集合溶接装置」という。)の配管については、次に定めるところによらなければならない。
for the joining part of a flange, a valve, a cock, etc., to take measures such as using gaskets and bringing the joining surfaces into close contact with each other; and
フランジ、バルブ、コツク等の接合部には、ガスケツトを使用し、接合面を相互に密接させる等の措置を講ずること。
to install a safety equipment for the main pipe and branch pipes. In this case, to install two or more safety equipment for each blowpipe.
主管及び分岐管には、安全器を設けること。この場合において、一の吹管について、安全器が二以上になるようにすること。
Read this with the articles around it
the gas welding equipment using manifolds
「ガス集合溶接装置」
Equipment made up of a gas manifold, safety devices, pressure regulators, pipes, blowpipes and the like that welds, cuts or heats metal using combustible gas and oxygen, as Article 1, item (ii) of the Order for Enforcement of Industrial Safety and Health Act defines it.
Short name set inArticle 310, paragraph (1)