When assembling concrete form shoring, the employer must create an assembly drawing and assemble the concrete form shoring according to the assembly drawing.
事業者は、型わく支保工を組み立てるときは、組立図を作成し、かつ、当該組立図により組み立てなければならない。
The assembly drawing set forth in the preceding paragraph must indicate the arrangement, method of connection and size of the components such as supports, girders, ties and diagonal bracings.
前項の組立図は、支柱、はり、つなぎ、筋かい等の部材の配置、接合の方法及び寸法が示されているものでなければならない。
The design of the concrete form shoring pertaining to the assembly drawing set forth in paragraph (1) must comply with the requirements set forth in the following items:
when the support, the girder or the supporting member of the girder (hereinafter referred to as "support, etc." in this Article) does not have a combined structure, the value of the stress produced on the support, etc., by the design load (meaning adding the load equivalent to the weight of things supported by concrete form shoring to the load of 150 kg or more per 1 m2 of the concrete form; hereinafter the same applies in this Article) does not exceed the value of the allowable stress of the materials of the support, etc.
支柱、はり又ははりの支持物(以下この条において「支柱等」という。)が組み合わされた構造のものでないときは、設計荷重(型枠支保工が支える物の重量に相当する荷重に、型枠一平方メートルにつき百五十キログラム以上の荷重を加えた荷重をいう。以下この条において同じ。)により当該支柱等に生ずる応力の値が当該支柱等の材料の許容応力の値を超えないこと。
when the support, etc., has a combined structure, the design load does not exceed the maximum working load designated by the manufacturer of the support, etc.
when a steel tubing frame is used as a support, the concrete form shoring is to have a safe structure even when the horizontal weight applied on its top is equivalent to 2.5% of the design load.
when something other than a steel tubing frame is used as a support, the concrete form shoring is to have a safe structure even when the horizontal weight applied on its top is equivalent to 5% of the design load.
略称規定第八十五条第一項第一号
…架設通路及び足場以外の機械等(法第三十七条第一項の特定機械等及び令第六条第十四号の型枠支保工(以下「型枠支保工」という。)を除く。)で、六月未満の期間で廃止するもの
わかりやすく言うと
支柱、はり、つなぎ、筋かいなどの部材で組み立てられ、建物のスラブや桁などのコンクリートを打ち込むときに使う型枠を支える仮設の設備のことです(労働安全衛生法施行令第六条第十四号)。
略称規定第二百四十条第三項第一号・この条の中だけ
支柱、はり又ははりの支持物(以下この条において「支柱等」という。)が組み合わされた構造のものでないときは、設計荷重(型枠支保工が支える物の重量に相当する荷重に、型枠一平方メートルにつき百五十キログラム以上の荷重を加えた荷重をいう。以下この…
わかりやすく言うと
型枠支保工の支柱、はり又ははりの支持物をまとめた呼び名で、この条で使われます。
定義第二百四十条第三項第一号・この条の中だけ
型枠支保工が支える物の重量に相当する荷重に、型枠一平方メートルにつき百五十キログラム以上の荷重を加えた荷重