When carrying out the work using press, etc., the employer must inspect the following matters before commencing the work for the day:
事業者は、プレス等を用いて作業を行うときには、その日の作業を開始する前に、次の事項について点検を行わなければならない。
the function of a clutch and a brake;
クラツチ及びブレーキの機能
the slackness of a bolt of a crankshaft, a flywheel, a slide, a connecting rod and a connecting screw;
クランクシヤフト、フライホイール、スライド、コネクチングロツド及びコネクチングスクリユーのボルトのゆるみの有無
the function of an anti-repeat device, quick-stop device and an emergency stop device;
一行程一停止機構、急停止機構及び非常停止装置の機能
the function of mechanism for preventing dangers due to a slide or a blade;
スライド又は刃物による危険を防止するための機構の機能
the conditions of a die and a bolster for a press machine; and
プレス機械にあつては、金型及びボルスターの状態
the conditions of a blade and a table for a shearing machine.
シヤーにあつては、刃物及びテーブルの状態
略称規定第百三十一条第一項
事業者は、プレス機械及びシヤー(以下「プレス等」という。)については、安全囲いを設ける等当該プレス等を用いて作業を行う労働者の身体の一部が危険限界に入らないような措置を講じなければならない。
わかりやすく言うと
プレス機械とシヤーをまとめた呼び名です。