Search

Search provisions, jump to a law or an article

1 article

Article 136Inspection before Commencing the Work

第百三十六条(作業開始前の点検)

When carrying out the work using press, etc., the employer must inspect the following matters before commencing the work for the day:

事業者は、プレス等を用いて作業を行うときには、その日の作業を開始する前に、次の事項について点検を行わなければならない。

the function of a clutch and a brake;

クラツチ及びブレーキの機能

the slackness of a bolt of a crankshaft, a flywheel, a slide, a connecting rod and a connecting screw;

クランクシヤフト、フライホイール、スライド、コネクチングロツド及びコネクチングスクリユーのボルトのゆるみの有無

the function of an anti-repeat device, quick-stop device and an emergency stop device;

一行程一停止機構、急停止機構及び非常停止装置の機能

the function of mechanism for preventing dangers due to a slide or a blade;

スライド又は刃物による危険を防止するための機構の機能

the conditions of a die and a bolster for a press machine; and

プレス機械にあつては、金型及びボルスターの状態

the conditions of a blade and a table for a shearing machine.

シヤーにあつては、刃物及びテーブルの状態

Read this with the articles around it

© 2026 japanlaw.orgA copy for reading and reference — not an official source, and not legal advice. Only the Japanese text published by the government has legal effect.Run by Genjido LLC (源氏道合同会社) · contact@genjido.comContactSourcesTermsPrivacy