In a workshop where workers carry out work, the employer must provide a cover, an enclosure, a sleeve, an overbridge, etc. for the parts of a machine, such as a prime mover, a rotating shaft, a gear, a pulley and a belt, that are likely to endanger workers.
事業者は、労働者が作業を行う作業場において、機械の原動機、回転軸、歯車、プーリー、ベルト等の労働者に危険を及ぼすおそれのある部分には、覆い、囲い、スリーブ、踏切橋等を設けなければならない。
The employer must use the sunken head type or provide a cover for set-screws and other fixtures attached to a rotating shaft, a gear, a pulley, a flywheel, etc.
事業者は、回転軸、歯車、プーリー、フライホイール等に附属する止め具については、埋頭型のものを使用し、又は覆いを設けなければならない。
The employer must not use a protruded fastener for joining a belt.
事業者は、ベルトの継目には、突出した止め具を使用してはならない。
The employer must provide a handrail with the height of 90 cm or more for the overbridge set forth in paragraph (1).
事業者は、第一項の踏切橋には、高さが九十センチメートル以上の手すりを設けなければならない。
A person engaged in work in a workshop where an overbridge has been provided pursuant to the provisions of paragraph (1) must use the overbridge.
略称規定第二十四条の十三第一項
労働者に危険を及ぼし、又は労働者の健康障害をその使用により生ずるおそれのある機械(以下単に「機械」という。)を譲渡し、又は貸与する者(次項において「機械譲渡者等」という。)は、文書の交付等により当該機械に関する次に掲げる事項を…
わかりやすく言うと
使うことによって労働者に危険を及ぼし、又は労働者の健康障害を生ずるおそれのある機械のことです。