As regards materials used for the facilities composed of temporary supports, work platforms, etc., for the purpose of piling up materials or temporary equipment, or of installing or moving construction machines, etc., and having a height of 2 m or more (hereinafter referred to as "working platforms"), the employer must not use those with marked damage, deformation or corrosion.
事業者は、仮設の支柱及び作業床等により構成され、材料若しくは仮設機材の集積又は建設機械等の設置若しくは移動を目的とする高さが二メートル以上の設備で、建設工事に使用するもの(以下「作業構台」という。)の材料については、著しい損傷、変形又は腐食のあるものを使用してはならない。
As regards the lumbers for working platforms, the employer must not use them unless they are free from cracks, worm-eaten spots, gnarls, slant fibers that are marked defects in terms of strength.
事業者は、作業構台に使用する木材については、強度上の著しい欠点となる割れ、虫食い、節、繊維の傾斜等がないものでなければ、使用してはならない。
As regards steel materials for main parts of supports, work floors, girders, sleepers, etc. to be used for working platforms, the employer must not use them unless they conform to the Japanese Industrial Standard G 3101 (Rolled Steel for General Structure), Japanese Industrial Standard G 3106 (Rolled Steel for Welded Structure), Japanese Industrial Standard G 3191 (Hot Rolled Steel Bar), Japanese Industrial Standard G 3192 (Hot Rolled Steel Sections), Japanese Industrial Standard G 3444 (Carbon Steel Tubes for General Structural Purposes) or Japanese Industrial Standard G 3466 (Carbon Steel Square Pipes for General Structural Purposes), or have a tensile strength equal to or greater than that prescribed in those Standards and an elongation corresponding to that tensile strength.
事業者は、作業構台に使用する支柱、作業床、はり、大引き等の主要な部分の鋼材については、日本産業規格G三一〇一(一般構造用圧延鋼材)、日本産業規格G三一〇六(溶接構造用圧延鋼材)、日本工業規格G三一九一(熱間圧延棒鋼)、日本工業規格G三一九二(熱間圧延形鋼)、日本産業規格G三四四四(一般構造用炭素鋼鋼管)若しくは日本産業規格G三四六六(一般構造用角形鋼管)に定める規格に適合するもの又はこれと同等以上の引張強さ及びこれに応じた伸びを有するものでなければ、使用してはならない。
略称規定第五百七十五条の二第一項
事業者は、仮設の支柱及び作業床等により構成され、材料若しくは仮設機材の集積又は建設機械等の設置若しくは移動を目的とする高さが二メートル以上の設備で、建設工事に使用するもの(以下「作業構台」という。)の材料については、著しい損傷…
わかりやすく言うと
建設工事に使う、仮設の支柱や作業床などで組み立てた高さ二メートル以上の設備で、材料や仮設機材を置いたり、建設機械などを据えたり動かしたりするためのもののことです。