As regards a generator room, the employer must conform to the requirements set forth in the following items:
事業者は、発生器室については、次に定めるところによらなければならない。
to be constructed with an incombustible wall, and to have the following structure or a structure with the strength equivalent to or stronger than those listed in the following sub-items:
壁は、不燃性のものとし、次の構造又はこれと同等以上の強度を有する構造のものとすること。
to be made of ferroconcrete with the thickness of 4 cm or more; and
厚さ四センチメートル以上の鉄筋コンクリートとすること。
to be made of steel or lumber on which metal lath is lined and mortar is painted 3 cm or more in thickness, or of steel on which an iron plate with thickness of 1.5 mm or more are lined;
鉄骨若しくは木骨に厚さ三センチメートル以上のメタルラス張モルタル塗りをし、又は鉄骨に厚さ一・五ミリメートル以上の鉄板張りをしたものとすること。
to use thin iron plate or lightweight incombustible materials for the roof and ceiling;
屋根及び天井には、薄鉄板又は軽い不燃性の材料を使用すること。
to project an exhaust pipe having a cross-section area of one-sixteenth of the floor area or more from the roof, and place the opening of the pipe at a distance of 1.5 m or more from a window, an entrance and other openings;
床面積の十六分の一以上の断面積をもつ排気筒を屋上に突出させ、かつ、その開口部は窓、出入口その他の孔口から一・五メートル以上離すこと。
to use an iron plate with the thickness of 1.5 mm or more, or with a structure having the same strength as the iron plate or stronger using incombustible materials for the door of an entrance;
出入口の戸は、厚さ一・五ミリメートル以上の鉄板を使用し、又は不燃性の材料を用いてこれと同等以上の強度を有する構造とすること。
略称規定第三百二条第一項
事業者は、アセチレン溶接装置のアセチレン発生器(以下「発生器」という。)については、専用の発生器室(以下「発生器室」という。)内に設けなければならない。
略称規定第三百二条第一項
事業者は、アセチレン溶接装置のアセチレン発生器(以下「発生器」という。)については、専用の発生器室(以下「発生器室」という。)内に設けなければならない。