When using a loading plate, fills, etc., in the case where a vehicle type material handling equipment, etc., is loaded to a truck, etc., or is unloaded from a truck, etc., by self-propelling or towing for transferring the equipment, the employer must comply with the following requirements in order to prevent dangers due to overturning, falling, etc. of the equipment:
事業者は、車両系荷役運搬機械等を移送するため自走又はけん引により貨物自動車に積卸しを行う場合において、道板、盛土等を使用するときは、当該車両系荷役運搬機械等の転倒、転落等による危険を防止するため、次に定めるところによらなければならない。
to load or unload the equipment at a level and firm place;
積卸しは、平たんで堅固な場所において行うこと。
when using a loading plate, to use the loading plate with a sufficient length, width and strength, and fix it securely with appropriate incline; and
道板を使用するときは、十分な長さ、幅及び強度を有する道板を用い、適当なこう配で確実に取り付けること。
when using fills or a temporary stand, etc., to secure a sufficient width, strength and appropriate incline.
盛土、仮設台等を使用するときは、十分な幅及び強度並びに適当なこう配を確保すること。
定義第百五十一条の二第一項・法令全体に適用
次の各号のいずれかに該当するもの
わかりやすく言うと
フォークリフト、ショベルローダー、フォークローダー、ストラドルキャリヤー、不整地運搬車、構内運搬車、貨物自動車のことです。構内運搬車は、一定の大きさ以下で最高速度が毎時十五キロメートル以下の、専ら荷を運ぶ自動車です。