1 条
When carrying out the open-cut excavation work inside a caisson or inside a well curb, the employer must take the following measures to prevent dangers to workers due to the rapid subsidence of the caisson or well curb:
事業者は、潜函又は井筒の内部で明り掘削の作業を行うときは、潜函又は井筒の急激な沈下による労働者の危険を防止するため、次の措置を講じなければならない。
to determine the method of excavation, the quantity of load, etc., based on the diagram on subsidence;
沈下関係図に基づき、掘削の方法、載荷の量等を定めること。
to have the height from the cutting edge to the ceiling or the girder 1.8 m or higher.
刃口から天井又ははりまでの高さは、一・八メートル以上とすること。
この改正法ができた当時の規定を指しています。その後の改正で、今の規定は別の内容になっていることがあるため、リンクしていません。この法令は本サイトに収録していないため、開ける条文がありません。どの規定を指しているかを特定できなかったため、リンクしていません。