When carrying out the breaking work using a concrete breaker, the employer must comply with the requirements set forth in the following items:
事業者は、コンクリート破砕器を用いて破砕の作業を行うときは、次に定めるところによらなければならない。
when charging a concrete breaker, to prohibit the use of naked fire or smoking in the vicinity by indicating the prohibition in a conspicuous place or by other methods;
コンクリート破砕器を装塡するときは、その付近での裸火の使用又は喫煙について、禁止する旨を見やすい箇所に表示することその他の方法により禁止すること。
to use a safe charging tool, which is unlikely to cause ignition of the concrete breaker due to friction, shock, static electricity, etc.
装塡具は、摩擦、衝撃、静電気等によりコンクリート破砕器が発火するおそれのない安全なものを使用すること。
to use a safe stemming, which is unlikely to cause ignition or inflammation, such as cement mortar or sand;
込物は、セメントモルタル、砂その他の発火又は引火の危険のないものを使用すること。
to take measures to prevent the broken materials, etc., from scattering; and
破砕された物等の飛散を防止するための措置を講ずること。
when the charged concrete breaker does not ignite after ignition, or when it is difficult to confirm that the charged concrete breaker has ignited, to remove the lead wire of the blaster from the igniter and short-circuit the end of the wire, and to take measures to prevent re-ignition; and not to allow the worker engaging in the concrete breaking work to approach the place where the concrete breaker is charged within five minutes after the measures have been taken.
点火後、装塡されたコンクリート破砕器が発火しないとき、又は装塡されたコンクリート破砕器が発火したことの確認が困難であるときは、コンクリート破砕器の母線を点火器から取り外し、その端を短絡させておき、かつ、再点火できないように措置を講じ、その後五分以上経過した後でなければ、当該作業に従事する労働者をコンクリート破砕器の装塡箇所に接近させないこと。