1 条
When attaching or removing the rod or bit, etc., of a boring machine, the employer must securely cut off the power rotating the rod, etc., by such means as fixing the clutch lever with a stopper.
事業者は、ボーリングマシンのロッド、ビット等を取り付け又は取り外すときは、クラッチレバーをストッパーで固定する等によりロッド等を回転させる動力を確実に遮断しなければならない。
When removing a rod or attaching or removing a bit, etc., from a boring machine, the employer must securely hold the rod with the rod holder, etc.
事業者は、ボーリングマシンのロッドを取り外すとき及びビット等を取り付け又は取り外すときは、ロッドをロッドホルダー等により確実に保持しなければならない。
この改正法ができた当時の規定を指しています。その後の改正で、今の規定は別の内容になっていることがあるため、リンクしていません。この法令は本サイトに収録していないため、開ける条文がありません。どの規定を指しているかを特定できなかったため、リンクしていません。