Article 194-27Checkup before Commencing the Work
第百九十四条の二十七(作業開始前点検)
When the work by vehicle for work at height is carried out, the employer must inspect the functions of the braking device, controlling device and working device before commencing the work for the day.
事業者は、高所作業車を用いて作業を行うときは、その日の作業を開始する前に、制動装置、操作装置及び作業装置の機能について点検を行わなければならない。
第百九十四条の二十八(補修等)
Changes on (Ministry of Health, Labour and Welfare Order No. 29 of 2026)
When having found an abnormality in carrying out the self-inspection set forth in Article 194-23 or Article 194-24, or the inspection set forth in the preceding Article, the employer must immediately make repairs or take other necessary measures.
事業者は、第百九十四条の二十三若しくは第百九十四条の二十四の自主検査又は前条の点検を行つた場合において、異常を認めたときは、直ちに補修その他必要な措置を講じなければならない。
Section 3 Railway Equipment and Handcart
第三節 軌道装置及び手押し車両
Subsection 1 General Provisions
第一款 総則
第百九十五条(定義)
The term "railway equipment" as used in this Ministerial Order means all units of equipment including rail tracks and a vehicle attached to a workplace, a power vehicle, a winch, etc. that is driven with the power on rails and used for transporting workers or cargos (excluding those for which the Railway Operation Act (Act No. 65 of 1900), the Railway Business Act (Act No. 92 of 1986) or the Railway Act (Act No. 76 of 1921) applies).
この省令で軌道装置とは、事業場附帯の軌道及び車両、動力車、巻上げ機等を含む一切の装置で、動力を用いて軌条により労働者又は荷物を運搬する用に供されるもの(鉄道営業法(明治三十三年法律第六十五号)、鉄道事業法(昭和六十一年法律第九十二号)又は軌道法(大正十年法律第七十六号)の適用を受けるものを除く。)をいう。
Subsection 2 Rail Tracks
第二款 軌道等
第百九十六条(軌条の重量)
The employer must have the weight of a rail to be equal to or more than the weight listed in the right column of the following Table in accordance with the vehicle body weight listed in the left column of the same Table:
| Vehicle Body Weight | Weight of Rail |
| Less than 5 tons | 9 kg |
| 5 tons or more and less than 10 tons | 12 kg |
| 10 tons or more and less than 15 tons | 15 kg |
| 15 tons or more | 22 kg |
事業者は、軌条の重量については、次の表の上欄に掲げる車両重量に応じて、同表の下欄に掲げる軌条重量以上としなければならない。
| 車両重量 | 軌条重量 |
| 五トン未満 | 九キログラム |
| 五トン以上十トン未満 | 十二キログラム |
| 十トン以上十五トン未満 | 十五キログラム |
| 十五トン以上 | 二十二キログラム |
第百九十七条(軌条の継目)
As regards joint of rails, the employer must securely fix the rails by using joint plates and welding them.
事業者は、軌条の継目については、継目板を用い、溶接を行なう等により堅固に固定しなければならない。
第百九十八条(軌条の敷設)
As regards laying of rails, the employer must securely fix the rails on the sleeper, concrete bed, etc., by using rail spikes, metal fixture, etc.
事業者は、軌条の敷設については、犬くぎ、止め金具等を用いて、軌条をまくら木、コンクリート道床等に堅固に締結しなければならない。
第百九十九条(まくら木)
The employer must ensure that the size and intervals of sleepers are appropriate to the vehicle body weight, the condition of bed, etc., in order to stabilize the rails.
事業者は、まくら木の大きさ及び配置の間隔については、軌条を安定させるため、車両重量、道床の状態等に応じたものとしなければならない。
As regards the sleeper to be used at places where they are susceptible to corrosion or where they are difficult to replace, the employer must ensure that sleepers having sufficient durability are used.
事業者は、腐食しやすい箇所又は取替えの困難な箇所で用いるまくら木については、耐久性を有するものとしなければならない。
第二百条(道床)
As regards rail tracks of which the bed consists of crushed stones, gravel, etc., among rail tracks laid for operating power vehicle with the vehicle body weight of 5 tons or more, the employer must sufficiently harden the bed as well as take measures to have good drainage in order to maintain the sleeper and rails in a safe condition.
事業者は、車両重量五トン以上の動力車を運転する軌道のうち道床が砕石、砂利等で形成されているものについては、まくら木及び軌条を安全に保持するため、道床を十分つき固め、かつ、排水を良好にするための措置を講じなければならない。
第二百一条(曲線部)
The employer must conform to the requirement set forth in the following items for a curved section of rail tracks:
事業者は、軌道の曲線部については、次に定めるところによらなければならない。
to have the radius of a curvature of 10 m or more;
曲線半径は、十メートル以上とすること。
to maintain an appropriate cant and a slack; and
適当なカント及びスラツクを保つこと。
to provide a guard rail in accordance with the radius of the curvature.
曲線半径に応じ、護輪軌条を設けること。
Article 202Gradient of Rail Tracks
第二百二条(軌道のこう配)
As regards the gradient of rail tracks at the section where a power vehicle is used, the employer must set the gradient ratio to fifty thousandth or less.
事業者は、動力車を使用する区間の軌道のこう配については、千分の五十以下としなければならない。
Article 203Junction of Rail Tracks
第二百三条(軌道の分岐点等)
The employer must equip the junction of rail tracks with a point and a frog having secure function, and equip the end of the rail tracks with secure wheel stoppers.
事業者は、軌道の分岐する部分には、確実な機能を有する転てつ器及びてつさを設け、軌道の終端には、確実な車止め装置を設けなければならない。
第二百四条(逸走防止装置)
When there is a risk of a vehicle overrunning, the employer must install an anchoring device.
事業者は、車両が逸走するおそれのあるときは、逸走防止装置を設けなければならない。
Article 205Clearance Between Vehicle and Side Wall
第二百五条(車両と側壁等との間隔)
When installing railway equipment inside a tunnel, etc. under construction, the employer must provide a clearance of 0.6 m or more between a vehicle and the side wall or an obstacle on one side of the track in order to prevent the danger of vehicles in operation coming into contact with persons engaged in work who are passing through; provided, however, that this does not apply when providing the clearance of 0.6 m or more is difficult due to reasons such as the small sectional area of the tunnel, etc., and any of the following measures has been taken:
to provide a clearly discernible safety zones at appropriate intervals; and
明確に識別できる回避所を適当な間隔で設けること。
to not allow persons engaged in work to enter the area in the traveling direction of a vehicle in operation by installing a signaling device, arranging a watcher, etc.
When installing railway equipment inside a tunnel, etc., under construction, the employer must maintain necessary distance between a vehicle and the sidewall or the ceiling of the tunnel, etc., and obstacles in order to prevent the person riding on a vehicle from coming into contact with the sidewall or the ceiling of the tunnel, etc., or obstacles; provided, however, that this does not apply when obstacles such as shoring, etc., deformed by the load of the land exist, and measures for easily discerning the obstacles have been taken in order to prevent the dangers of person riding on a vehicle from coming into contact with the obstacles in the tunnel, etc.
第二百七条(信号装置)
The employer must install a signaling device in accordance with the condition of railway equipment.
事業者は、軌道装置の状況に応じて信号装置を設けなければならない。
Subsection 3 Vehicle
第三款 車両
Article 208Brake of a Power Vehicle
第二百八条(動力車のブレーキ)
The employer must equip a power vehicle with a hand brake as well as equip a power vehicle that has the vehicle body weight of 10 tons or more with a power brake.
事業者は、動力車には、手用ブレーキを備え、かつ、十トン以上の動力車には、動力ブレーキをあわせ備えなければならない。
The employer must set the ratio of the pressure of a brake applied to the brake shoe to the pressure of the brake wheel applied to rails to fifty hundredth or more and seventy-five hundredth or less for a power brake and twenty hundredth or more for a hand brake.
事業者は、ブレーキの制輪子に作用する圧力と制動車輪の軌条に対する圧力との割合を、動力ブレーキにあつては百分の五十以上百分の七十五以下、手用ブレーキにあつては百分の二十以上としなければならない。
Article 209Facilities for a Power Vehicle
第二百九条(動力車の設備)
The employer must not use a power vehicle unless it conforms to the following requirements:
事業者は、動力車については、次に定めるところに適合するものでなければ、使用してはならない。
to be equipped with signaling device such as a whistle, an alarm bell, etc.;
汽笛、警鈴等の合図の装置を備えること。
to be equipped with a front lamp and lighting facilities for the driver's cabin when operating the power vehicle at night or underground;
夜間又は地下において使用するときは、前照灯及び運転室の照明設備を設けること。
to be equipped with a lubricant pressure indicator for an internal combustion locomotive; and
内燃機関車には、潤滑油の圧力を表示する計器を備えること。
to be equipped with an automatic circuit-breaker for an electric locomotive, and with a lightning arrester for an electric locomotive with an aerial cableway system.
電気機関車には、自動しや断器を備え、かつ、架空線式の場合には避雷器を備えること。
Article 210Operator's Seat of a Power Vehicle
第二百十条(動力車の運転者席)
The employer must not use an operator's seat of a power vehicle unless it conforms to the following requirements:
事業者は、動力車の運転者席については、次に定めるところに適合するものでなければ、使用してはならない。
to have the structure that has a visibility that enables an operator to safely operate the vehicle; and
運転者が安全な運転を行なうことができる視界を有する構造とすること。
to be equipped with an enclosure, etc., in order to prevent an operator from dangers of falling.
運転者の転落による危険を防止するため、囲い等を設けること。
第二百十一条(人車)
The employer must not use a vehicle exclusively for transporting workers (hereinafter referred to as "worker carrier") unless it conforms to the following requirements:
事業者は、労働者の輸送に用いる専用の車両(以下「人車」という。)については、次に定めるところに適合するものでなければ、使用してはならない。
to be equipped with such devices as a seat, a grasping rod, etc. that enables workers to ride on the carrier safely;
労働者が安全に乗車できる座席、握り棒等の設備を設けること。
to be equipped with an enclosure and a gate;
囲い及び乗降口を設けること。
as regards a worker carrier pulled by a winching system used on inclined rails, to be equipped with facilities enabling an operator of the winch and a person riding on the worker carrier to communicate with each other in an emergency;
斜道において用いる巻上げ装置によりけん引される人車については、巻上げ機の運転者と人車のとう乗者とが緊急時に連絡できる設備を設けること。
as regards the worker carrier set forth in the preceding item, to be equipped with an emergency stop device in order to prevent dangers due to cutting off of a wire rope, excessive speed, etc.; and
as regards a worker carrier used on inclined rails with an inclined angle of 30 degrees or more, to be equipped with a derailment preventive device.
傾斜角三十度以上の斜道に用いる人車については、脱線予防装置を設けること。
第二百十二条(車輪)
The employer must not use a wheel unless it conforms to the following requirements:
事業者は、車輪については、次に定めるところに適合するものでなければ、使用してはならない。
to have the width which ensures that the tread safely mounts on the rails when the tires with their flanges worn to the maximum extent pass the track part having the maximum gauge;
タイヤの幅は、フランジが最も摩耗した状態で、最大軌間を通過するときに、なおその踏面が軌条に安全に乗る広さとすること。
to have a flange thickness which provides sufficient strength even when their flange has been worn to the maximum extent and while allowing the tires to pass through junctions and frogs; and
フランジの厚さは、最も摩耗したときに、十分な強さを有し、かつ、分岐及びてつさの通過に差しつかえない厚さ以下とすること。
to have a flange height which is higher than that required for preventing tires from derailment and which does not run on the joint plates, frogs, etc.
フランジの高さは、タイヤが軌条からはずれない高さ以上で、継目板及びてつさ等に乗り上げない高さとすること。
第二百十三条(連結装置)
When coupling vehicles, the employer must use a secure coupling device.
事業者は、車両を連結するときは、確実な連結装置を用いなければならない。
Article 214Coupling of Worker Carriers on Inclined Rails
第二百十四条(斜道における人車の連結)
When using a worker carrier on inclined rails and coupling a worker carrier with another worker carrier or with a wire rope socket by a chain or a link, the employer must keep them coupled with a spare chain or wire rope in order to prevent the worker carrier from breaking into a run due to cutting off of the chain or the link.
事業者は、斜道において人車を用いる場合において、人車と人車又はワイヤロープソケツトをチエーン又はリンクで連結するときは、当該チエーン又はリンクの切断等による人車の逸走を防止するため、予備のチエーン又はワイヤロープで連結しておかなければならない。
Subsection 4 Winching System
第四款 巻上げ装置
Article 215Brake of a Winching System
第二百十五条(巻上げ装置のブレーキ)
The employer must equip a winching system with a brake that enables to promptly stop a vehicle when the vehicle is applied the maximum load, and maintain the stopped state of the vehicle.
事業者は、巻上げ装置には、車両に最大の荷重をかけた場合において、車両をすみやかに停止させ、かつ、その停止状態を保持することができるブレーキを備えなければならない。
第二百十六条(ワイヤロープ)
The employer must not use a wire rope to be used on a winching system unless it conforms to the following requirements:
事業者は、巻上げ装置に用いるワイヤロープについては、次に定めるところに適合するものでなければ、使用してはならない。
to have the safety coefficient of a wire rope at 6 or higher (10 or more for a wire rope to be used for a worker carrier). In this case, the safety coefficient is to be the value obtained by dividing the value of the breaking load of the wire rope by the maximum value of the load applied to the wire rope; and
安全係数は六以上(人車に用いるワイヤロープにあつては、十以上)とすること。この場合の安全係数は、ワイヤロープの切断荷重の値を当該ワイヤロープにかかる荷重の最大の値で除した値とする。
to be fixed to vehicles by secure method such as using links.
リンクを使用する等確実な方法により、車両に取り付けること。
Article 217Prohibition of the Use of an Inadequate Wire Rope
第二百十七条(不適格なワイヤロープの使用禁止)
The employer must not use a wire rope falling under any of the following items for a winching system:
事業者は、次のいずれかに該当するワイヤロープを巻上げ装置の巻上げ用ワイヤロープとして使用してはならない。
those with 10% or more of element wires cut in one strand;
ワイヤロープ一よりの間において素線の数の十パーセント以上の素線が切断しているもの
those with the reduction ratio of a diameter exceeding 7% of the nominal diameter;
直径の減少が公称径の七パーセントを超えるもの
those with kinks; and
キンクしたもの
those with marked deformation or corrosion.
著しい形くずれ又は腐食があるもの
operationmachine translation
「運行」
Using a road transport vehicle as its equipment is meant to be used, whether or not it carries people or goods, other than using it only off public roads, as Article 2, paragraph (5) of the Road Transport Vehicle Act defines it.
Short name set inArticle 16, paragraph (2)
person engaged in workmachine translation
「作業従事者」
A person who does the work of a job carried out by a person running a business (事業), whether or not that person is a worker (労働者) employed there.
Defined inArticle 18-5, paragraph (1)
tunnel, etc.machine translation
「ずい道等」
A tunnel, or an underground pit other than a vertical shaft, leaving out pits dug to extract rock as described in Article 2 of the Quarrying Act.
Defined inArticle 24-6, paragraph (1)
vehicle for work at heightmachine translation
「高所作業車」
A vehicle for work at height, as the term is used in Article 10, item (vii) of the Order for Enforcement of Industrial Safety and Health Act.
Defined inArticle 36, paragraph (1), item (x-5)
railway equipment
「軌道装置」
All the equipment attached to a workplace, including track, cars, power cars and hoists, that carries workers or goods on rails by power, other than equipment to which the Railway Operation Act, the Railway Business Act or the Act on Rail Tracks applies.
Defined inArticle 195, paragraph (1)· applies throughout the law
worker carrier
「人車」
A vehicle used only to carry workers, such as in a mine or tunnel railway.
Short name set inArticle 211, paragraph (1)