The employer must not use a wheel unless it conforms to the following requirements:
事業者は、車輪については、次に定めるところに適合するものでなければ、使用してはならない。
to have the width which ensures that the tread safely mounts on the rails when the tires with their flanges worn to the maximum extent pass the track part having the maximum gauge;
タイヤの幅は、フランジが最も摩耗した状態で、最大軌間を通過するときに、なおその踏面が軌条に安全に乗る広さとすること。
to have a flange thickness which provides sufficient strength even when their flange has been worn to the maximum extent and while allowing the tires to pass through junctions and frogs; and
フランジの厚さは、最も摩耗したときに、十分な強さを有し、かつ、分岐及びてつさの通過に差しつかえない厚さ以下とすること。
to have a flange height which is higher than that required for preventing tires from derailment and which does not run on the joint plates, frogs, etc.
フランジの高さは、タイヤが軌条からはずれない高さ以上で、継目板及びてつさ等に乗り上げない高さとすること。
Read this with the articles around it