Article 660Measures Concerning the Facilities Used for Compressed Air Method
第六百六十条(圧気工法に用いる設備についての措置)
In the case set forth in Article 31, paragraph (1) of the Act, when the orderer has persons engaged in work pertaining to the contractor use facilities used for the caisson method or other compressed air methods in which the pressure inside the working chamber exceeds atmospheric pressure, the orderer must ensure that the facilities comply with the standards prescribed in Articles 4 through 7-3 and Article 21, paragraph (2) of the High Pressure Work Ordinance.
Read this with the articles around it
person engaged in workmachine translation
「作業従事者」
A person who does the work of a job carried out by a person running a business (事業), whether or not that person is a worker (労働者) employed there.
Defined inArticle 18-5, paragraph (1)
High Pressure Work Ordinancemachine translation
「高圧則」
Short name for the Ordinance on Safety and Health of Work under High Pressure (Ministry of Labour Order No. 40 of 1972).
Short name set inArticle 100, paragraph (1)
orderermachine translation
「注文者」
A person who has ordered work in construction or another business Cabinet Order (政令) specifies and does that work itself, as Article 31, paragraph (1) of the Industrial Safety and Health Act describes; it must take measures to prevent industrial injuries when its contractors' workers use its buildings, equipment or materials.
Short name set inArticle 644, paragraph (1)
contractormachine translation
「請負人」
In this Chapter, a contractor as Article 31, paragraph (1) of the Industrial Safety and Health Act uses the word: a contractor of an orderer (注文者) who does work in construction or another business Cabinet Order (政令) specifies itself, including, where the work is done through several layers of contracts, every contractor party to each later contract.
Defined inArticle 644, paragraph (1)· applies only in this chapter