Search

Search provisions, jump to a law or an article

1 article

Article 644Measures Concerning a Pile Driver and a Pile Drawer

第六百四十四条(くい打機及びくい抜機についての措置)

The orderer set forth in Article 31, paragraph (1) of the Act (hereinafter referred to as the "orderer"), in the case set forth in the same paragraph, when having persons engaged in work pertaining to the contractor (meaning the contractor set forth in the same paragraph; hereinafter the same applies in this Chapter) use pile drivers or pile drawers, must conform the pile drivers or pile drawers to be used to the standards of pile drivers and pile drawers prescribed in Part II, Chapter II, Section 2 (limited to Article 172, Articles 174 through 176, Articles 178 through 181, and Article 183).

法第三十一条第一項の注文者(以下「注文者」という。)は、同項の場合において、請負人(同項の請負人をいう。以下この章において同じ。)に係る作業従事者にくい打機又はくい抜機を使用させるときは、当該くい打機又はくい抜機については、第二編第二章第二節(第百七十二条、第百七十四条から第百七十六条まで、第百七十八条から第百八十一条まで及び第百八十三条に限る。)に規定するくい打機又はくい抜機の基準に適合するものとしなければならない。

Read this with the articles around it

© 2026 japanlaw.orgA copy for reading and reference — not an official source, and not legal advice. Only the Japanese text published by the government has legal effect.Run by Genjido LLC (源氏道合同会社) · contact@genjido.comContactSourcesTermsPrivacy