As regards parts of chemical facilities (excluding valves or cocks) that come into contact with dangerous goods or substances with a flash point of 65 degrees or higher (hereinafter referred to as "dangerous goods, etc"), the employer must take measures such as constructing the parts with corrosion-resistant materials and providing linings, in accordance with the type, temperature or concentration, etc., of the dangerous goods, etc., in order to prevent explosions or fires due to extreme corrosion of the parts by the dangerous goods, etc.
Read this with the articles around it
chemical facilities
「化学設備」
Fixed (not mobile) equipment that makes or handles dangerous goods, or makes or handles substances with a flash point of 65 degrees Celsius or higher at or above that flash point, other than acetylene welding equipment, gas welding equipment using manifolds and drying equipment, as Article 9-3, item (i) of the Order for Enforcement of Industrial Safety and Health Act defines it.
Defined inArticle 4, paragraph (1), item (iii)
dangerous goodsmachine translation
「危険物」
The explosive, ignitable, oxidizing and flammable substances and combustible gases listed in Appended Table 1 of the Order for Enforcement of Industrial Safety and Health Act.
Defined inArticle 30, paragraph (1), item (i)
dangerous goods, etc
「危険物等」
Dangerous goods, or substances with a flash point of 65 degrees Celsius or higher.
Short name set inArticle 269, paragraph (1)