Search

Search provisions, jump to a law or an article

1 article

Article 269Prevention of Corrosion

第二百六十九条(腐食防止)

As regards parts of chemical facilities (excluding valves or cocks) that come into contact with dangerous goods or substances with a flash point of 65 degrees or higher (hereinafter referred to as "dangerous goods, etc"), the employer must take measures such as constructing the parts with corrosion-resistant materials and providing linings, in accordance with the type, temperature or concentration, etc., of the dangerous goods, etc., in order to prevent explosions or fires due to extreme corrosion of the parts by the dangerous goods, etc.

事業者は、化学設備(バルブ又はコックを除く。)のうち危険物又は引火点が六十五度以上の物(以下「危険物等」という。)が接触する部分については、当該危険物等による当該部分の著しい腐食による爆発又は火災を防止するため、当該危険物等の種類、温度、濃度等に応じ、腐食しにくい材料で造り、内張りを施す等の措置を講じなければならない。

Read this with the articles around it

© 2026 japanlaw.orgA copy for reading and reference — not an official source, and not legal advice. Only the Japanese text published by the government has legal effect.Run by Genjido LLC (源氏道合同会社) · contact@genjido.comContactSourcesTermsPrivacy