When using a loading plate, fills, etc., in the case where a vehicle for work at height is loaded to a truck, etc., or unloaded from a truck, etc., by self-propelling or towing for transferring the machine, the employer must comply with the following requirements in order to prevent dangers due to overturning, falling, etc., of the vehicle:
事業者は、高所作業車を移送するため自走又はけん引により貨物自動車に積卸しを行う場合において、道板、盛土等を使用するときは、当該高所作業車の転倒、転落等による危険を防止するため、次に定めるところによらなければならない。
to load or unload the vehicle at a level and firm place;
積卸しは、平坦で堅固な場所において行うこと。
when using a loading plate, to use the plate with sufficient length, width and strength, and fix it securely with appropriate incline; and
道板を使用するときは、十分な長さ、幅及び強度を有する道板を用い、適当なこう配で確実に取り付けること。
when using fills or a temporary stand, etc., to secure sufficient width, strength and appropriate incline.
盛土、仮設台等を使用するときは、十分な幅及び強度並びに適当なこう配を確保すること。
Read this with the articles around it
vehicle for work at heightmachine translation
「高所作業車」
A vehicle for work at height, as the term is used in Article 10, item (vii) of the Order for Enforcement of Industrial Safety and Health Act.
Defined inArticle 36, paragraph (1), item (x-5)