Search

Search provisions, jump to a law or an article

1 article

Article 194-14Transfer of Vehicle for Work at Height

第百九十四条の十四(高所作業車の移送)

When using a loading plate, fills, etc., in the case where a vehicle for work at height is loaded to a truck, etc., or unloaded from a truck, etc., by self-propelling or towing for transferring the machine, the employer must comply with the following requirements in order to prevent dangers due to overturning, falling, etc., of the vehicle:

事業者は、高所作業車を移送するため自走又はけん引により貨物自動車に積卸しを行う場合において、道板、盛土等を使用するときは、当該高所作業車の転倒、転落等による危険を防止するため、次に定めるところによらなければならない。

to load or unload the vehicle at a level and firm place;

積卸しは、平坦で堅固な場所において行うこと。

when using a loading plate, to use the plate with sufficient length, width and strength, and fix it securely with appropriate incline; and

道板を使用するときは、十分な長さ、幅及び強度を有する道板を用い、適当なこう配で確実に取り付けること。

when using fills or a temporary stand, etc., to secure sufficient width, strength and appropriate incline.

盛土、仮設台等を使用するときは、十分な幅及び強度並びに適当なこう配を確保すること。

Read this with the articles around it

© 2026 japanlaw.orgA copy for reading and reference — not an official source, and not legal advice. Only the Japanese text published by the government has legal effect.Run by Genjido LLC (源氏道合同会社) · contact@genjido.comContactSourcesTermsPrivacy