Search

Search provisions, jump to a law or an article

1 article

Article 183Steam Hoses

第百八十三条(蒸気ホース等)

When using a pile driver or a pile drawer driven with steam or compressed air, the employer must take the following measures:

事業者は、蒸気又は圧縮空気を動力源とするくい打機又はくい抜機を使用するときは、次の措置を講じなければならない。

to firmly connect a steam hose or an air hose with a hammer at a place other than the joint parts of the hose and the hammer for preventing damages or disconnection of these joints parts due to the motion of the hammer.

ハンマーの運動により、蒸気ホース又は空気ホースとハンマーとの接続部が破損し、又ははずれるのを防止するため、当該接続部以外の箇所で蒸気ホース又は空気ホースをハンマーに固着すること。

to install a device for cutting off steam or air at a place where a hammer operator is able to easily handle the device.

蒸気又は空気をしや断するための装置をハンマーの運転者が容易に操作することができる位置に設けること。

Read this with the articles around it

© 2026 japanlaw.orgA copy for reading and reference — not an official source, and not legal advice. Only the Japanese text published by the government has legal effect.Run by Genjido LLC (源氏道合同会社) · contact@genjido.comContactSourcesTermsPrivacy