Search

Search provisions, jump to a law or an article

1 article

Article 116Prohibition of Riding on a Table of a Vertical Lathe, etc.

第百十六条(立旋盤等のテーブルへの搭乗の禁止)

In a workshop where a vertical lathe, a planer, etc. is used, the employer must not allow a person engaged in work in the workshop to ride on a table of a vertical lathe, a planer, etc. during operation; provided, however, that this does not apply when a person on the table or a person placed at the operation panel is able to immediately stop the machine.

事業者は、立旋盤、プレーナー等を使用する作業場において作業に従事する作業従事者を運転中の立旋盤、プレーナー等のテーブルに乗せてはならない。ただし、テーブルに乗つた者又は操作盤に配置された者が、直ちに機械を停止することができるときは、この限りでない。

A person engaged in work in the workshop set forth in the preceding paragraph, excluding the case referred to in the proviso of the same paragraph, may not ride on a table of a vertical lathe, a planer, etc., during operation.

前項の作業場において作業に従事する作業従事者は、同項ただし書の場合を除き、運転中の立旋盤、プレーナー等のテーブルに乗つてはならない。

Read this with the articles around it

© 2026 japanlaw.orgA copy for reading and reference — not an official source, and not legal advice. Only the Japanese text published by the government has legal effect.Run by Genjido LLC (源氏道合同会社) · contact@genjido.comContactSourcesTermsPrivacy