Search

Search provisions, jump to a law or an article

1 article

Article 352Inspection Before Using Electric Machine and Appliance

第三百五十二条(電気機械器具等の使用前点検等)

When using electrical machinery and apparatus, etc. listed in the left column of the following table, the employer must, before commencing use for the day, inspect the inspection matters listed in the right column of the same table in accordance with the type of that electrical machinery and apparatus, etc., and when having found any abnormality, must immediately repair or replace it.

Type of Electrical Machinery and Apparatus, etc.Inspection Matters
Holders for welding rods, etc. set forth in Article 331Presence or absence of damage to the insulated protective portion and the connected portion of the cable for holders
Automatic voltage reducing devices for alternating current arc welding machines set forth in Article 332Operating state
Earth-leakage circuit breakers for preventing electric shock set forth in Article 333, paragraph (1)
Motor-driven appliances set forth in Article 333 that are grounded by the method set forth in paragraph (2) of that ArticlePresence or absence of abnormalities, such as disconnection of the ground wire or lifting of the grounding pole
Movable electric cables and the connecting tools attached to them set forth in Article 337Presence or absence of damage to the covering or sheathing
Voltage detectors set forth in Article 339, paragraph (1), item (iii)Voltage detection performance
Short-circuit grounding equipment set forth in Article 339, paragraph (1), item (iii)Presence or absence of damage to the mounting fittings and grounding lead wires
Insulating protective equipment set forth in Articles 341 through 343Presence or absence of damage such as cracks, splits and tears, and dryness
Insulating devices set forth in Articles 341 and 342
Live line work equipment set forth in Article 341 and Articles 343 through 345
Live line work instruments set forth in Articles 341, 343 and 344
Insulating protective equipment and live line work instruments set forth in Articles 346 and 347, and insulating devices set forth in Article 347
Insulating protective devices set forth in Article 349, item (iii) and Article 570, paragraph (1), item (vi)

事業者は、次の表の上欄に掲げる電気機械器具等を使用するときは、その日の使用を開始する前に当該電気機械器具等の種別に応じ、それぞれ同表の下欄に掲げる点検事項について点検し、異常を認めたときは、直ちに、補修し、又は取り換えなければならない。

電気機械器具等の種別点検事項
第三百三十一条の溶接棒等のホルダー絶縁防護部分及びホルダー用ケーブルの接続部の損傷の有無
第三百三十二条の交流アーク溶接機用自動電撃防止装置作動状態
第三百三十三条第一項の感電防止用漏電しや断装置
第三百三十三条の電動機械器具で、同条第二項に定める方法により接地をしたもの接地線の切断、接地極の浮上がり等の異常の有無
第三百三十七条の移動電線及びこれに附属する接続器具被覆又は外装の損傷の有無
第三百三十九条第一項第三号の検電器具検電性能
第三百三十九条第一項第三号の短絡接地器具取付金具及び接地導線の損傷の有無
第三百四十一条から第三百四十三条までの絶縁用保護具ひび、割れ、破れその他の損傷の有無及び乾燥状態
第三百四十一条及び第三百四十二条の絶縁用防具
第三百四十一条及び第三百四十三条から第三百四十五条までの活線作業用装置
第三百四十一条、第三百四十三条及び第三百四十四条の活線作業用器具
第三百四十六条及び第三百四十七条の絶縁用保護具及び活線作業用器具並びに第三百四十七条の絶縁用防具
第三百四十九条第三号及び第五百七十条第一項第六号の絶縁用防護具

Read this with the articles around it

© 2026 japanlaw.orgA copy for reading and reference — not an official source, and not legal advice. Only the Japanese text published by the government has legal effect.Run by Genjido LLC (源氏道合同会社) · contact@genjido.comContactSourcesTermsPrivacy