Search

Search provisions, jump to a law or an article

1 article

Article 161Transfer of Vehicle Type Construction Machine

第百六十一条(車両系建設機械の移送)

In the case of loading a vehicle type construction machine onto a truck, or unloading it from a truck, by self-propelling or towing for transferring the machine, when using loading plates, fills, etc., the employer must comply with the following requirements in order to prevent dangers due to overturning, falling, etc. of the vehicle type construction machine:

事業者は、車両系建設機械を移送するため自走又はけん引により貨物自動車に積卸しを行う場合において、道板、盛土等を使用するときは、当該車両系建設機械の転倒、転落等による危険を防止するため、次に定めるところによらなければならない。

to load or unload the machine at a level and firm place;

積卸しは、平たんで堅固な場所において行なうこと。

when using a loading plate, to use the plate with sufficient length, width and strength, and fix it securely with appropriate incline; and

道板を使用するときは、十分な長さ、幅及び強度を有する道板を用い、適当なこう配で確実に取り付けること。

when using fills, a temporary stand, etc., to secure sufficient width and strength, and an appropriate incline.

盛土、仮設台等を使用するときは、十分な幅及び強度並びに適度な勾配を確保すること。

Read this with the articles around it

© 2026 japanlaw.orgA copy for reading and reference — not an official source, and not legal advice. Only the Japanese text published by the government has legal effect.Run by Genjido LLC (源氏道合同会社) · contact@genjido.comContactSourcesTermsPrivacy