When carrying out the work using a vehicle type construction machine, the employer must take necessary measures for the operation route of the machine, such as preventing collapse of the shoulder and uneven settling of the ground, and maintaining the necessary width in order to prevent workers from dangers due to overturning or falling of the machine.
事業者は、車両系建設機械を用いて作業を行うときは、車両系建設機械の転倒又は転落による労働者の危険を防止するため、当該車両系建設機械の運行経路について路肩の崩壊を防止すること、地盤の不同沈下を防止すること、必要な幅員を保持すること等必要な措置を講じなければならない。
When the work using a vehicle type construction machine is carried out at road shoulder, inclined place, etc., and there is a risk of endangering workers due to overturning or falling of the machine, the employer must place a guide, and have the person guide the machine.
事業者は、路肩、傾斜地等で車両系建設機械を用いて作業を行う場合において、当該車両系建設機械の転倒又は転落により労働者に危険が生ずるおそれのあるときは、誘導者を配置し、その者に当該車両系建設機械を誘導させなければならない。
The operator of a vehicle type construction machine set forth in the preceding paragraph must follow the instructions given by the guide set forth in the same paragraph.
Read this with the articles around it
vehicle type construction machine
「車両系建設機械」
A construction machine listed in Appended Table 7 of the Order for Enforcement of Industrial Safety and Health Act — machines for levelling, hauling and loading, digging, foundation work, compaction, concrete placing and demolition — that runs on power and can travel under its own power to any place.
Defined inArticle 94-2, paragraph (1), item (ii)