Search

Search provisions, jump to a law or an article

1 article

Article 103Power Cutting Device

第百三条(動力しや断装置)

The employer must provide a power cutting device such as a switch, a clutch or a belt shifter for each machine; provided, however, that this does not apply to a series of machines having a common power cutting device and not requiring manual supply or extraction of raw materials during the process of operation.

事業者は、機械ごとにスイツチ、クラツチ、ベルトシフター等の動力しや断装置を設けなければならない。ただし、連続した一団の機械で、共通の動力しや断装置を有し、かつ、工程の途中で人力による原材料の送給、取出し等の必要のないものは、この限りでない。

The employer must, when the machine set forth in the preceding paragraph is for the process of cutting, drawing, compressing, punching, bending or expressing, provide the power cutting device set forth in the same paragraph at a place where a person engaging in the processing work is able to operate it without leaving the work station.

事業者は、前項の機械が切断、引抜き、圧縮、打抜き、曲げ又は絞りの加工をするものであるときは、同項の動力しや断装置を当該加工の作業に従事する者がその作業位置を離れることなく操作できる位置に設けなければならない。

The employer, as regards the power cutting device set forth in paragraph (1), must provide a device that can be easily operated and is not likely to unexpectedly activate due to contact, vibration, etc.

事業者は、第一項の動力しや断装置については、容易に操作ができるもので、かつ、接触、振動等のため不意に機械が起動するおそれのないものとしなければならない。

Read this with the articles around it

© 2026 japanlaw.orgA copy for reading and reference — not an official source, and not legal advice. Only the Japanese text published by the government has legal effect.Run by Genjido LLC (源氏道合同会社) · contact@genjido.comContactSourcesTermsPrivacy