Search

Search provisions, jump to a law or an article

1 article

Article 333Prevention of Electric Shocks Due to Current Leakage

第三百三十三条(漏電による感電の防止)

As regards machines or appliance equipped with motor (hereinafter referred to as "motor-driven appliance") which are of the movable or portable type, those that have voltage to ground exceeding 150 V, or those used at places where they are wetted with liquids having high electric conductivity such as water, or at places where electric conductivity is high, such as on an iron plate, a steel frame, or a surface plate, the employer must connect an earth-leakage circuit breaker for preventing electric shocks that conform to the rating of the circuit, and having good sensitivity and the function to reliably work in order to prevent danger of electric shocks due to the current leakage to the electric circuit to which motor-driven appliances are connected.

事業者は、電動機を有する機械又は器具(以下「電動機械器具」という。)で、対地電圧が百五十ボルトをこえる移動式若しくは可搬式のもの又は水等導電性の高い液体によつて湿潤している場所その他鉄板上、鉄骨上、定盤上等導電性の高い場所において使用する移動式若しくは可搬式のものについては、漏電による感電の危険を防止するため、当該電動機械器具が接続される電路に、当該電路の定格に適合し、感度が良好であり、かつ、確実に作動する感電防止用漏電しや断装置を接続しなければならない。

When it is difficult to take the measures prescribed in the preceding paragraph, the employer must use the machine and appliance by grounding the metal portions of the outer frame of motor-driven appliance, metal covers of motors, prescribed in the following manner:

事業者は、前項に規定する措置を講ずることが困難なときは、電動機械器具の金属製外わく、電動機の金属製外被等の金属部分を、次に定めるところにより接地して使用しなければならない。

to connect the metal parts to a grounding pole by any of the following methods:

接地極への接続は、次のいずれかの方法によること。

the method of connecting to a grounding pole by using a movable cable with a core exclusively used for a grounding line and a connecting device with a terminal exclusively used for a grounding terminal;

一心を専用の接地線とする移動電線及び一端子を専用の接地端子とする接続器具を用いて接地極に接続する方法

the method of connecting a grounding line attached to a movable electric cable and the grounding terminal installed at the location adjacent to the power source outlet of a motor-driven apparatus;

移動電線に添えた接地線及び当該電動機械器具の電源コンセントに近接する箇所に設けられた接地端子を用いて接地極に接続する方法

when the method set forth in (a) of the preceding item is used, to take measures to prevent confusing the grounding conductor with an electric conductor connected to the electrical circuit, and the grounding terminal with a terminal connected to the electrical circuit;

前号イの方法によるときは、接地線と電路に接続する電線との混用及び接地端子と電路に接続する端子との混用を防止するための措置を講ずること。

to securely connect the grounding pole with the ground by a method such as burying it in the ground to a sufficient depth.

接地極は、十分に地中に埋設する等の方法により、確実に大地と接続すること。

Read this with the articles around it

© 2026 japanlaw.orgA copy for reading and reference — not an official source, and not legal advice. Only the Japanese text published by the government has legal effect.Run by Genjido LLC (源氏道合同会社) · contact@genjido.comContactSourcesTermsPrivacy