Article 332Automatic Voltage Reducing Device for Alternating Current Arc Welding Machines
第三百三十二条(交流アーク溶接機用自動電撃防止装置)
When carrying out alternating current arc welding, etc. (excluding automatic welding) at places surrounded by electric conductors which are very confined, such as inside of a double-bottom or peak tank of a vessel, of a drum or dome of a boiler, or at the place with the height of 2 m or higher where there is a risk of endangering workers due to falling and there is a risk of workers coming into contact with grounding materials with high conductivity of steel frame, etc., the employer must use an automatic voltage reducing device for alternating current arc welding machines.
事業者は、船舶の二重底若しくはピークタンクの内部、ボイラーの胴若しくはドームの内部等導電体に囲まれた場所で著しく狭あいなところ又は墜落により労働者に危険を及ぼすおそれのある高さが二メートル以上の場所で鉄骨等導電性の高い接地物に労働者が接触するおそれがあるところにおいて、交流アーク溶接等(自動溶接を除く。)の作業を行うときは、交流アーク溶接機用自動電撃防止装置を使用しなければならない。
Read this with the articles around it