When carrying out the work of pressure feeding with power and through hoses those liquids which causes dangers of corrosive effect on the skin, such as sulfuric acid, nitric acid, hydrochloric acid, acetic acid, chlorosulfonic acid, caustic soda solution and cresol (hereinafter referred to as "corrosive liquids"), the employer must take the following measures for the equipment used in the work:
事業者は、硫酸、硝酸、塩酸、酢酸、クロールスルホン酸、か性ソーダ溶液、クレゾール等皮膚に対して腐食の危険を生ずる液体(以下「腐食性液体」という。)をホースをとおして、動力を用いて圧送する作業を行うときは、当該圧送に用いる設備について、次の措置を講じなければならない。
to provide a pressure gauge at a readily visible location for the person who operates the equipment used for pressure feeding (hereinafter referred to as the "operator" in this Article), and a device for cutting off power at a place where the operator can easily operate it, respectively;
圧送に用いる設備の運転を行う者(以下この条において「運転者」という。)が見やすい位置に圧力計を、運転者が容易に操作することができる位置に動力を遮断するための装置を、それぞれ備え付けること。
to use the hoses and their connecting tools that are anti-corrosive, heat-resistant and cold-resistant against the corrosive liquids fed;
ホース及びその接続用具は、圧送する腐食性液体に対し、耐食性、耐熱性及び耐寒性を有するものを用いること。
for hoses, to set the pressure for their safe use by conducting hydraulic tests, etc., and indicate the set pressure on hoses, and not to carry out the feed using a pressure exceeding the pressure;
ホースについては、水圧試験等により、安全に使用することができる圧力を定め、これを当該ホースに表示し、かつ、当該圧力を超えて圧送を行わないこと。
when there is a risk of abnormal pressure acting on the inside of hoses, to provide the equipment used for pressure feeding with preventive device for excessive pressurizing such as unloaders and return valves;
ホースの内部に異常な圧力が加わるおそれのあるときは、圧送に用いる設備にアンローダ、リターンバルブ等の過圧防止装置を備え付けること。
to securely connect the connecting parts of hoses and pipes other than hoses, and between hoses using connecting tools;
ホースとホース以外の管及びホース相互の接続箇所については、接続用具を用いて確実に接続すること。
when carrying out pressure feeding at a gauge pressure exceeding 200 kPa, as regards the connecting tool set forth in the preceding item, to use those whose structure is unlikely to be disconnected due to the pressure such as the screw connection method, three-hook connection method, etc., those having three or more bottoms at the part to mount hoses, etc.;
ゲージ圧力二百キロパスカルを超える圧力で圧送を行うときは、前号の接続用具については、ねじ込結合方式、三鈎式結合方式等の方式による接続用具で、ホースを装着する部分に三箇以上の谷を有するもの等当該圧力により離脱するおそれのない構造のものを用いること。
to appoint an operator and have the operator monitor the operation of the equipment used for pressure feeding and the pressure gauge; and
運転者を指名し、その者に圧送に用いる設備の運転及び圧力計の監視を行わせること。
to inspect the hoses and their connecting tools before commencing the use for the day, and to exchange them when there is a risk of scattering or leakage of corrosive liquids due to defects such as damage, corrosion, etc.
ホース及びその接続用具は、その日の使用を開始する前に点検し、損傷、腐食等の欠陥により、圧送する腐食性液体が飛散し、又は漏えいするおそれのあるときは、取り換えること。
Read this with the articles around it
corrosive liquids
「腐食性液体」
A liquid that can corrode the skin, such as sulfuric acid, nitric acid, hydrochloric acid, acetic acid, chlorosulfonic acid, caustic soda solution or cresol.
Short name set inArticle 326, paragraph (1)
operator
「運転者」
In Article 326, the person who runs the equipment used to pump corrosive liquids (腐食性液体) through hoses.
Short name set inArticle 326, paragraph (1), item (i)· applies only in this article