Search

Search provisions, jump to a law or an article

1 article

Article 285Welding of Piping or a Container with Residual Oil

第二百八十五条(油類等の存在する配管又は容器の溶接等)

As regards piping or a tank, a drum or other containers in which inflammable oil or combustible dust other than dangerous goods, or dangerous goods are likely to exist, the employer must not have a worker carry out welding, fusing or other work using fire, or work that is likely to produce sparks unless measures for preventing explosions or fires, such as removing, etc., the inflammable oil or combustible dust other than the dangerous goods, or dangerous goods have been taken in advance.

事業者は、危険物以外の引火性の油類若しくは可燃性の粉じん又は危険物が存在するおそれのある配管又はタンク、ドラムかん等の容器については、あらかじめ、これらの危険物以外の引火性の油類若しくは可燃性の粉じん又は危険物を除去する等爆発又は火災の防止のための措置を講じた後でなければ、溶接、溶断その他火気を使用する作業又は火花を発するおそれのある作業をさせてはならない。

A worker must not carry out the work set forth in the preceding paragraph until the measures set forth in the same paragraph have been taken.

労働者は、前項の措置が講じられた後でなければ、同項の作業をしてはならない。

Read this with the articles around it

© 2026 japanlaw.orgA copy for reading and reference — not an official source, and not legal advice. Only the Japanese text published by the government has legal effect.Run by Genjido LLC (源氏道合同会社) · contact@genjido.comContactSourcesTermsPrivacy